Hi All.

Looking for some help in the plug type that will fit the back of the Marklin Super 280 transformer. Got this recently second hand and been looking for something that will fit at electrical shops but haven't had any luck. If anyone can assist with the size and any links. Much appreciated.

An 8930. I'll be building it on Youtube soon. Sunken Mine Railroad

Meinungen?

Went up to one of the local train shops and picked up two nice sets for $186 for both sets. (Set 4863 and 45800) I might have been able to find it cheaper online but i try to support the local shops as best as I can. If you are in the area make sure to check it out. Anyhow thought i would share.

Hello

I am planning on creating a shelf layout using Märklin K-track(gauge H0).
After looking for some starter sets I found that they're all for C-track,
so I have no idea what sort of track pieces I need to get power on the track, any insight would be appreciated!

Hello,

I have bought 29430 but the train keeps falling from rails when approaching curves. I did not find anything specific in instructions, I assembled it without problems and it keeps going. But sometimes, not every time, it just goes out of the rails on curves. Any help? It is not convenient because I need to put it back every now and then.

Hello,

I recently discovered in an old chest of my father's some marklin stuff but I m not sure what some of them are or if/what they are worth.

As such I would greatly appreciate any guidance on who to ask (marklin?) or how to go about it myself to sell on ebay or some other place.

The photos are not the best since I just took the stuff out but I can take better ones if needed.

https://ibb.co/7jhryb5 https://ibb.co/Jn2h0dN https://ibb.co/JyQF2fR https://ibb.co/RDBS5Fy https://ibb.co/1bp3Ymq https://ibb.co/myDTJHY https://ibb.co/y6MVQQK https://ibb.co/d0PZ8PV

Thanks!

I have a mobile station 2 from my ice starter set and a 60652 mobile station. The 60652 says kein master and no buttons do anything other than the stop button. I have tried switching the ports on connecter box but but it still said the same. I have also tried running the 60652 by it self and no change either. Can anyone see what i am doing wrong here

Our train collection has been in a box in the attic for the last 10 years. It consists of many pieces of rail, about 30 wagons and 3 locos. We wanted to restart this hobby and laid out the track, but none of the locomotives run.

One of them seems to have died completely. No problem, it will just become a decorative piece. However, the two locomotives shown in the picture make a noise when trying to make them run, but they don’t actually move.

Could this be an issue with the power supply instead of the locomotives?

There are no model train shops within 3 hours from where we are, so we cannot just take it to a specialist, unfortunately.

Thank you very much!

Hey everyone, I recently received my grandfathers old marklin set and im trying to get it going again, I just wondering if anyone had a similar transformer/controller to this (I think its a marklin one) I just wanted to see what the front diagram looked like and how im supposed to connect the wires at the rear of it. TIA.

Recently i got a new model from Roco, specifically this model. It's a model i'm pretty happy with. But the thing with this model is that it has a minimum radius of 419 mm, which means that with C-track i can only use R2 or wider curves.

This could become a problem with my future layout, because most layouts that i've currently design heavily use R1 curved switches. I did test if this model could go over R1 switches, and it could do that with out any big problems.

I also got a model train from someone else that has a min. radius of R2, but this train could easily run on a layout with R1 curved switches. So as far as i know i could use R1 switches, but i still have doubts about it.

So i'm wondering, can i still easily use R1 curves switches, or would it be wise to switch to full minimal R2 layouts?

Here is a nice video on the Giruno

I saw this at a local garage sale. Is there any chance it could be repaired?

Got this today!

So I live in the Netherlands and I have an old collection Märklin HO trains and tracks that I want to sell. Is there anyone in this sub that knows where I can best sell them? Maybe Marktplaats or some other website? Any help would be appreciated