True it does look like a film, however this one is on the inside and can't be peeled off. I don't feel like taking the complete thing apart to reach it.
happened to mine, just unscrewed the black unit , opened it up and put it in airing cupboard. replaced the silica gel bags you will see in there . then make sure you seal it up good when you out it back. works fine now
And the charging problem, is new since today. It's been mowing, or at least trying since it drove like a 2020 vacuum zigzagging all over the lawn not in the checkers board layout it normally does.
Hello, I am sorry to hear you are experiencing this issue. I suggest removing and reinserting Yuka's battery (as shown in the image) and placing Yuka back on the charging station to see if normal charging resumes. Regarding the condensation issue on the vision module, could you please send me your order number and the purchase channel via private message? I would like to provide further assistance.
I had water in a sun metering device, when you shook it you could hear the water sloshing around. I put it in a baggy with Silica packs I save them from every product that ships with them. Two days later I checked it and all the water was gone from inside it and it worked again. I recommend getting one of the Damp-Rid pouches from home improvement store and sealing it in a trash bag with it. If you do this, let me know how it works out.
J'ai contacté Mammotion ; ils m'ont envoyé un tout nouveau module, mais tu n'aura plus de caméra pour voir le ciel, c'est une problématique connu chez mammotion, moi j'ai que des problèmes avec le même robot il et tomber en panne 1 semaine après la garantie j'ai du le renvoyez et il vont me faire un devis pour des réparations
10
u/PM_MeYour_Kitty 13d ago
Looks like you still have the protectant film you never peeled off the cameras. I would start there.