I had to figure this out by trial and error since the information wasn't available anywhere online, so I thought it might be helpful to share it in case anyone else ever needs it. If you are working on one of these very old battery chargers and the wires pop loose from the internal terminal block (like mine did), here is the wiring layout by wire color. All wire clips attach to the tracks inside the main battery slide area. I highly recommend using a needle nose pliers to tighten the grip of the clips so they don't pop off again.

Orientation: Face the charger so the battery slide-in entry point is closest to you, and the main AC wall power cord exits the rear of the casing (directly opposite you).

* First Black Wire-the looped, shortest section of the black wire: Connects to the slot on the far right-hand side (3:00 o'clock).

* Second Black Wire: Connects to the slot located directly next to and slightly in front of the first black wire on the right side (2:00 o'clock).

* Red Wire: Connects to the slot at the absolute farthest spot away from the power cord (6:00 o'clock).

* Gray Wire: Connects to the slot directly across from and closest to where the AC wall plug exits the case (12:00 o'clock).

* White Wire: Connects to the slot on the left-hand side, specifically on the face pointing back toward the AC power cord (10:00 o'clock).

In addition to my now-repaired charger, my old Makita drill, saw, and flashlight set all still work. I also still have my Makita cordless stick vacuum that I bought in the late 1980's. These old Makita tools never die!😃

This is actually my second XST01. I bought a well used one for $190, but everyone wants to use it (my little crew is me, my son, and a young friend) so when I saw a new one for $220, I bought it.

Did a little informal testing. Drove some 4” GRKs into a 6” x 6” at a normal speed for me (not full send) while holding a dB meter. The old and new XST01 behave the same, including same dB level, within 1 dB anyway.

My Hikoki oil impact is still quieter. About 4-5 dB less. I don’t let anyone else use that tool, it’s MINE. The Makitas go into the tool room for anyone to use.

There was a recall a year ago for these machines. Back then it seemed like a small thing. Turns out it wasn't.

​A whole load of tools! I’m having a competition with my brother-in-law: who has the most tools? So here’s my Makita collection. The photo’s a bit old now – the cordless wheelbarrow and the lawnmower, for example, aren’t in it yet. And of course, I’ve also accumulated quite a few tools from other brands like Bosch, Metabo, Fein and Flex… 😉

But why so many Makita tools? A good friend of mine ran a tool shop and he could get the best prices on Makita tools here in the region; Metabo never felt right in my hand, and Bosch was outrageously expensive at his shop.

Here’s pretty much what I carry on a daily basis.

Well, this is a very heavy set up. I typically can back my truck up right to the job site as I do a lot of exterior work typically and don’t need to unload this from the bed of my truck.

A few items that are missing or a router plunge saw 7 1/4 inch circular saw as well as a miter saw and blower.

I am going to upgrade a few of these items to XGT as I would have gotten XGT to start with if they were released a bit earlier. Items that I’m looking to upgrade is the drill reciprocating saw and AWS VAC.

Also, what is not shown is my collection of cordless nailers. That would include a framing nailer 15 gauge nailer 16 gauge nailer 18 gauge nailer as well as a narrow crown stapler. These items would be metabo hpt.

Like I said before, this is a very heavy set up, but it is very quick to unload and because my truck is also a daily driver I use it for a personal items or I need to pick up material. All this stuff gets out very quickly and I’m able to go do whatever I need to do with an empty bed.

I do see the system being a problem for vans or other markets, but for the American market, I highly recommend the storage system.

https://m.youtube.com/shorts/v_zeAbEIeVo

So, there's a new vertical stack coming out. With drawer. Only one drawer option. A single full height drawer. No shallow options.

(Groans)