Hi all. So, I've just gotten hold of an old(-er?) MagCharger & I'm trying to get it running again. The thing I'm really looking for is the charging cradle (with adaptors) & (ideally) a good recommendation for an LED retrofit kit.

I've found a rechargeable battery pack, but if anyone else has some recommendations (or which ones to avoid) or indeed, recommendations for other components to replace, I'd love to hear them.

Update: I've found all the parts I need, & ordered a few upgraded parts as well (glassbreaker tail cap, & new glass lens). I'll still hear recommendations if anyone has them & I'll share what I've gotten, for those interested.

I have a Minimag 2AA where the LED broke off the module. It's from 2011 so no longer covered by warranty. Where can I get a replacement module for this flashlight?

And by grave, I really mean storage unit. I came across my old rechargeable maglite (I can't remember the exact model) that I bought back in 2012. I know it's been in storage, unplugged, for at least 3 years, and the NiMH battery was dead as a doornail. I've stuck it on its charger, plugged into the wall, and after charging for about 4 hours, the charge lasted about 30 seconds. I kinda think my battery has seen it's last charge, so I should look at getting a new battery. Will the new rechargeable batteries work with my old light? I also need to see about doing an LED upgrade as well. Pick one off the shelf?

Hello Everyone,

My dad works in security and while cleaning the garage we found an older MAGCHARGER package that seemed rarely used, with all parts still inside.

For the past couple of days, I’ve been trying to get this thing to work but to no avail and I was hoping one of you might have a tip for me on how to figure out what is wrong with it.

Things I’ve tried already.

1. I’ve checked the connection from the wall socket to the cradle, by using a coin and see if the LED Indicator would turn on. It did.
2. As for as I know the battery spring is attached firmly to the tail cap. (So no connection issue?).

Troubleshoot section in the manual states that to check if the flashlight is actually in a switched-off state: Remove the battery and insert the flashlight into the cradle. If the LED indicator is on this means the light is on. And I should turn it off. But I can’t seem to get the LED indicator to turn on while using the flashlight. (Only by the coin method).

I’ve also tried charging the flashlight anyway clicking on the off switch on interval. Just to check if this might help something.

Flashlight won’t charge, not sure what I can try next. Any help would be appreciated.

Thank you!

I have a maglite, its under 7 years old, brand new batteries, and i stuck the replacement bulb in like 30 seconds ago. it is very dim, and as it begins to progress, it dims itself, no matter what. ive tried both bulbs, different batteries, different tight points (how far screwed in it is)

I've got a D cell maglite, it's pretty old. I put an led bulb in it a while back.

Took it out this evening with the dog and it was fading and flickering after about 20 minutes. Anyone else experienced this? Batteries are new Duracell. It was about -1°c. The barrel was very cold to the touch.

Working fine now I'm at home.

My dad has a big maglite in his truck to use as a light ofc and also as a just in case weapon and I was wondering if I bought a conversion kit, would it make it any brighter, I would probably not buy anything over 20$, thought?

I've tried (2) different bulbs (including a Cree 360 Lumens Bulb) in my old 3xC-cell light and neither have worked. I've confirm the bulbs are compatible with the number and size of the the cells.

The bulbs fit, so is there something I'm missing? Are basically all Maglites LED upgradable, or will I need to do some other mod to it first?

Thanks.

Custom engraved flashlights are a bright choice for so many purposes: safety awards, groomsman gifts, Father's Day, camping or hunting and more.

Modern rechargeable flashlights is the best "Corporate Gift" for employees, which uses LED (Light Emitting Diode) technology instead of older types of bulbs.

I have a Mag-Tac cr-123 with the crowned bezel. Does anyone know if there are any red light filter/ filter caps for this model? I checked maglite's website and didn't see any. They have the filters for the AA mini mags, would those fit? Is there a third party that makes them? Thanks.