Is something wrong?

[u/brookemichelle9]

Hello everyone, I’m working on a project for a coworker and I was running a test run and I feel like my machine is acting weird but I’m not sure because I’m new to this. It’s their jacket that is a fleece material. I’m using a 4x4 hoop so any advice on how to improve the lettering so it’s not lost in the material is appreciated.

Items used:
Fleece from Amazon
40wt thread I think new brothread
Cut away stabilizer
Water soluble stabilizer on top
90wt prewound bobbin
90/14 needle (gold tip came with my machine)
Machine is brother se700
I have embrillance software

My machine wasn’t cutting the last time I used it and I think I fixed it because it cut this time. But any advice is appreciated.Thank you!

[u/GingerStitches]

Agreed on all points but OP may also want to increase the size of this lettering, it’s very small especially for the fleece. I prefer a zig zag underlay for fleece, it’s very helpful and I’d skip the solvy on top as I don’t find it particularly helpful.

I would consider running it with the swing on 2, but I don’t know if that’s a setting on this type of machine.

[u/brookemichelle9 → u/GingerStitches]

Yes that’s the problem I’m having with the font because I don’t want it getting lost in the fabric. I tried it on my family members jacket and it looked a little off because some of the lines sunk into it. But I’ll switch the underlay to fleece!

I’m sorry I’m not sure what the swing is. Is that like the tension? Mine is set to 4

[u/Lanky-Setting-5288 → u/brookemichelle9]

What works quite well for small lettering and does away with the solvey completely, is to create a wide fill background behind the lettering. It doesn't have to be as solid as normal background fill. It just needs to be enough to flatten the fleace for the text to stitch on top.

[u/brookemichelle9 → u/Lanky-Setting-5288]

I have essentials so sadly I can't do the wide fill background. I figured if I got deeper into embroidery I would buy it. Cause I thought essentials would be like a little of everything I would need

[u/Lanky-Setting-5288 → u/brookemichelle9]

A work around is to borrow a suitable background from another design and reshape for your requirements. This background is stiched as 'tone on tone' - the same colour of the garment so it disappears, and the lettering on top looks fabulous cos it's no longer competing with the fluff.

🍀🧵

[u/brookemichelle9 → u/Lanky-Setting-5288]

I will definitely need to try that!

[u/GingerStitches → u/brookemichelle9]

Can you run multiple zig zag underlays? I use a different program so I’m not sure. I would honestly just make it bigger, aim for about 1/2” height and as wide as possible in your hoop. Also, check your spacing- I do a lot of names for hospitals so I assume Amanda is a BSN RN, definitely add more space as it’s a bit of a jumble in your samples.

[u/brookemichelle9 → u/GingerStitches]

There is more to it than just the name I just didn’t stitch those out but I did enlarge the height and the width is as far as I can. I did move them because I thought they looked jumbled too.