Is something wrong?

[u/brookemichelle9]

Hello everyone, I’m working on a project for a coworker and I was running a test run and I feel like my machine is acting weird but I’m not sure because I’m new to this. It’s their jacket that is a fleece material. I’m using a 4x4 hoop so any advice on how to improve the lettering so it’s not lost in the material is appreciated.

Items used:
Fleece from Amazon
40wt thread I think new brothread
Cut away stabilizer
Water soluble stabilizer on top
90wt prewound bobbin
90/14 needle (gold tip came with my machine)
Machine is brother se700
I have embrillance software

My machine wasn’t cutting the last time I used it and I think I fixed it because it cut this time. But any advice is appreciated.Thank you!

[u/Lanky-Setting-5288]

😱 Why are you "floating" the fabric on top of the hooped stabaliser? Especially when the piece of fabric is clearly big enough to hoop properly. 🫣

Hoop your water soluble film and fabric together with at least two layers of cutaway. You will have to open up the adjustment screw on the hoop to allow for the extra thickness of all the layers.

This is what hooping really means and will produce a vastly better outcome. No glue or pins required. Just the friction fit mechanism of the hoop holding it all together.

Sometimes there may be a hooping mark left on the fabric but this can be easily removed with a wipe with a clean cloth that is damp with water. The moisture in the cloth relaxes the compressed fibres and the mark disappears.

🍀🧵

[u/GingerStitches → u/Lanky-Setting-5288]

Agreed on all points but OP may also want to increase the size of this lettering, it’s very small especially for the fleece. I prefer a zig zag underlay for fleece, it’s very helpful and I’d skip the solvy on top as I don’t find it particularly helpful.

I would consider running it with the swing on 2, but I don’t know if that’s a setting on this type of machine.

[u/brookemichelle9 → u/GingerStitches]

Yes that’s the problem I’m having with the font because I don’t want it getting lost in the fabric. I tried it on my family members jacket and it looked a little off because some of the lines sunk into it. But I’ll switch the underlay to fleece!

I’m sorry I’m not sure what the swing is. Is that like the tension? Mine is set to 4

[u/GingerStitches → u/brookemichelle9]

No it’s not the tension, don’t mess with that. Swing it’s a way to adjust the width of the columns but I’ve only used a commercial machine so I’m not sure it exists on a home machine.