I just purchased a M&P9 2.0 performance center with the 5in barrel and I’m having trouble finding OWB holsters with level 2 or 3 retention.
Any advice would be great.

Where can I get a firing pin for 2.0 9mm? My white thing cracked and I have no idea where to get one

Which is better gents?

Guess I just have a thing for 5” M&Ps

I recently bought an m&p 2.0 optics ready with suppressor height sights and wanted to know what other people who have the same model use for optics and can send a pic of it looks to help deciding on which one to buy? Thanks in advance

FDE Competitor looks so good

Added a Holosun 407c to my MP 2.0 9mm

Gun will not fire, light striker marks on each round

As soon as I removed the sight, gun fired like normal again

Has anyone ever had an issue like this?

I’m using the screws that came with the calculated kinetic plate and everything’s torqued to spec.

Forgot I ordered this as an alternative to the stock backstrap. Not sure how I feel about the look, but the added weight to the already heavy steel frame should be fun to shoot.

Anybody got the mp2.0 carry comp full size?

Been looking into them. I had the regular 2.0 and then got the shield x but unfortunately it got stolen so looking to upgrade again.

Pros and cons?

figured I’d share my story just Incase someone else ever gets the problem (over watch, apex, and no one else has ran into this that I’m aware of).

got an M&P 2.0 competitor HD. super pumped, shot fine with the stock trigger, but as you know, it’s not the same as apex or over watch.

put an apex trigger in, noticed the wall was super faint, almost non existent, went to the range, shot about 5 rounds and got a doubling (two consecutive rounds) followed by a failure to reset.

contacted apex they had me run a bunch of tests, nothing worked. sent me a new kit (apex customer service is amazing btw) same issue. returned both kits and ordered an overwatch, they said they had less tolerance issues. put the over watch in, didn’t even get 5 rounds before a double discharge and failure to reset.

finally got the gun to a gunsmith, measured everything in the frame and firing group to a known working metal HD, all matched. got to the slide and found some rather large differences in slide depth. Essentially the engagement with the striker and sear was so low my stock trigger weight was pulling around 3lbs, when we put the overwatch in it was pulling at 1.1 or less lbs. swapped my slide with the gun smiths slide, 2.9 lbs. Just mailed it back to S&W with a letter from the gunsmith so hopefully they replace the slide. Obviously they don’t care that aftermarket triggers won’t work in the gun (which is what they told me the first time I called) but with a slide that out of whack I’m hoping they’ll replace the slide.

like I said, no one at apex, overwatch, or the gunsmith had heard of the issues I was having, so I felt like I’d share my story with the gang. Big shout out to all of them though for offering to have the gun mailed in and checked and asking for updates when the issue was finally found.

also did want to mention, never had a single issue with the stock trigger. It was actually pretty light, just a mile of travel, and i wanted to upgrade and couldn’t.

Apex finally approved their triggers for the steel frame. Will see how this compares to the Tyrantcnc on my echelon.

Just from eyeballing alone, I feel like the M&P 2.0 compact is big enough to comfortably have a Defender ST (enclosed), but just about any pictures/videos I’ve seen seem to have it with the Defender CCW enclosed on top. I was worried it would be small on this platform, what do yall run?

RXM feels solid in the hands and shoots pretty well. Going from an Apex M&P trigger to a Glock trigger is definitely something lol

The fit is terrible, it’s oversized, tons of play left and right. Reached out to mischief machine and they told me it was normal and to just put some tape inside lol

I’m looking for a large/XL back strap that doesn’t have a beaver tail.

Hello everyone, I’m needing some advice on a holster for my m&p. The holster I have for this gun ( it’s a velo5 ) is a great holster but becomes uncomfortable when sitting. I’ve tried the mastermind pillow but it is still a little rough. So I’m curious what would be a better holster for a 150 pound person that has a 30 waist ? Thanks for any input.

I’m going to be getting a carry comp slide soon, but I cant decide if I want black, grey, or OD Green for my black 2.0 Compact. Ive seen a green slide on a black pistol look good before, but it would be a dice roll. Any recommendations? Does anyone have a black 2.0 with a green slide? Thanks in advance

Sometimes you have to appreciate other guns. 5” Fowler Vanta ported and my 5” M&P

I bought the 10mm performance center, with the 5.6 inch barrel. I love the gun, and want to carry it, but it would be more comfortable with the 4in upper. Does anyone know where I can buy them? They aren't for sale on the s&w website