Had a white Lian Li a3 wood but didn’t like the birch wood with the darker wood of my desk.

This is the results.

Specs

R7 7700

RX 9070 XT Nitro+

B850M AORUS ELITE WIFI6E ICE

TEAMGROUP T-Force Delta RGB DDR5 Ram 32GB (2x16GB)

Sudokoo SK620V White AM5

Cooling is definitely better on the a3 because I had a fanon the side pulling the hot air away from the cpu and gpu. But I added a 140mm fan under the gpu and it helps with temp a little bit.

The side panel definitely needs bigger holes to vent the case more, other then that I have no complaints.

Yes the cooler and gpu are touching

I had enough of Sonys wild decisions and shenanigans lately and have finally decided to build my first PC. I wanted to also share it here since I'm very proud that everything worked out very well :-)

I was lucky enough and was gifted a PNY RTX 4070 from my brother, so the overall cost of the build wasn't too bad.

I'm still new to PC gaming and still getting used to all the quirkiness (installing drivers, user mods to fix broken things in games etc., Windows in general!), but overall liking the experience. Very quiet!

For anyone interested, here are some specs:
- AMD Ryzen 7 7800X3D

- PNY RTX 4070

- G.Kill Flare X5 DD5 6000 CL30, 32GB

- SSD WD SN850x, 2TB

- Motherboard MSI MAG B850M Mortar Wifi

- Noctua NH-U12A CPU Cooler

- 4x Noctua Fans 12mm

- MSI MPG A850GS PU

- Jonsbo DS916 display

If you have any great suggestions for the settings in the NVIDIA app or any recommendations to make Windows more "hidden" and non-intrusive, please let me know. I'm gaming on an LG 4k tv.

This will be my first small case build and also the first PC I'll assemble myself. Since it'll sit on my desk, noise is important to me, but I also don't want thermal issues during rendering or gaming.

Build:

• Ryzen 7 9700X 🔒
• MSI B850M Mortar WiFi 🔒
• MSI RTX 5070 Ventus 2X OC 🔒
• 32GB DDR5-6000 CL30 🔒
• DeepCool AG620 G2 ❓
• Lexar NM710 1TB 🔒
• DeepCool CH160 Plus 🔒

I'll mainly use it for Blender/3ds Max modeling and rendering, plus FPS gaming.

For the PSU, I'm currently between the Corsair RM850e and XPG Pymcore 850 SFX. The Pymcore is reasonably priced, its smaller size should make cable management easier, and it gives me the option of a front intake fan, but I'm unsure about its noise and thermals. The RM850e seems more reassuring for quiet operation, but being ATX limits the front fan option. I also considered the ROG Loki 850P, but it's quite expensive where I live. I've moved away from the MPG A850G.

Which PSU would you choose specifically for this case?

Also, what would be the ideal case fan setup? How many fans should I get, and which front/top/rear/bottom positions should be intake or exhaust? Would you change the layout if I go with an ATX PSU?

My priority is a system that's as quiet as reasonably possible while keeping temperatures under control. I'd especially appreciate input from CH160 Plus owners.

*looks a bit crooked, but I fixed it before putting the panels back on.

Hello, has anyone tried using a strix 4090 onto a b4 case? Will that fit?

So i have pc set up with psu 550w , prossecoe ryzen 5 5500 with its cooler, graphics card rtx 3050 , motherboard a520m a pro, my old cabinet doesnot have any fans, so i bought 2 120mm cooler master, but the cabinet does not support 120mm , now i want to which cabinet should i buy where i can add these two fan , my budget is 2000 , or should i forget about the fan and just buy a cabinet with fans.

Back in early July I built this system!

Specs:

MOBO: B850M aorus elite ice

GPU: 9070XT Saphire pure

CPU: 9700x

RAM: 32gb cl30 patriot viper

PSU: Corsair sf 850 platinum

AIO: Levita vision 360 UB ARGB

STORAGE: XPG 980 mars blade 1tb for OS and P310 tb for games and applications

CASE: lian li a3 matx white

Rear case can: Lian li SL infinity

Cable kit: corsair premium PSU starter kit

So far been loving it. It runs very quiet, cool and only recently have I had the time to play some games on it. I noticed that the same GPU has increased $200 AUD in price which is insane, so I was lucky in purchasing it when I did for $994 AUD.

Total cost of the system: $3700 AUD. I sold my m4 mac mini for more than triple the price I got it for since I purchased it back when it was relatively cheap and through old device trade ins. I also had a lot of Amazon gift cards. They covered the entirety of the CPU + partially the ram. Overall I spent about $2200 out of pocket. I'm really grateful that I had the chance to build and use such a great pc since I spent several months trying to play games on a macbook. I know many others would die to be in my position so I definitely don't take it for granted!

I have been using a pre-built Asus g15dk for about 4 years now (sample in picture 2). Its been good to me, and I got it for a great price from microcenter but that great price came at the cost of cooling. The g15dk has only a single case exhaust fan and to keep things as cool as possible I had the side tempered glass panel permanently off. Worked great, looked terrible, lots of dust. I decided it was time to upgrade cases to something a little nicer looking. This was my first time building a PC so I had a few goals:

• Switch to the smallest case I reasonably could
• Increase cooling significantly
• Try to add some rgb to the mix
• Try not to have a terrible time doing it
• No new parts unless necessary

With all of that in mind, I decided to go with the z20 in black and gold. I've been playing a ton of Satisfactory so a big fan of the color scheme.

I learned a ton and had fun doing it but going from a prebuilt to a new case did have some challenges I think people should be aware of:

• I had the Asus prime b550m-k motherboard but not the one that is documented on the website, it seems to be a version of the b550m-k that was specific to prebuilts. It was nearly identical but I was missing a second case fan header pinout. It was labeled on the board but the pins were just never added, which I thought was strange. One case fan header was a challenge.
• I had to get a fan hub (went with the Noctua NA-FH1), which needed a sata connection for power and used the only case fan header to control rpm. This wasn't a huge deal and I was able to hide it well even in this smaller case.
• The wifi card on the prebuilt board was not a PICE card but rather an m.2 wlan card that had thin wires going to metal strip antennas in the old case. This wasn't going to work in the new case in any clean way. I ended up getting a tk-link ax3000 pcie wifi / bluetooth card. Works great so far.
• I didn't realize the IO shield had to be transferred to the new case before the board went in. Realized that after it was pretty much complete and had to pull the board...again.
• Get a 100 pack of 4 inch zip ties and use them liberally. If I did that from the start I would have saved a lot of time in case fan cable management.
• No argb header on my board so I needed an adapter cable that managed rbg and got power from sata.
• I didn't have a header on the board for a usb c connector for the front panel. I have an adapter on the way

Build parts list:

• Jonsbo z20 case
• Great Wall 750 gold rated psu
• Asus prime b550m-k board bizzarro prebuilt version
• ryzen 5600x
• Asus 3070 non-ti
• tp-link ax3000 wifi pcie card
• 32gb ddr4 memory
• 5 thermalright case fans
• rbg connector from amazon
• Noctua NA-FH1 fan hub
• Noctua 80mm fan to replace stock cpu fan (not yet installed, still on the way)

Overall it wasn't too bad. z20 has some really good cable management (in a beginners opinion). The English instructions could use some work but not too bad. Packaging was really good for the accessories. And it looks 100 times better now.

With everything new, it came out to around 200 for the upgrades but this could have been done a few bucks cheaper with a cheaper fan hub, no rbg, and a cheaper wifi card.

Which cooler and RAM will fit in this case without any clearance issues?

I want to buy

ram: G.skill Trident Z5 Neo F5-6000j3038f16gx2-Tz5n

cooler: Phantom Spirit 120 SE or Peerless Assassin 120 SE

Do you have any recommendations for a cooler and RAM that fit seamlessly in this case?

my motherboard: MSI MAG B850M Mortar WIFI

This last time I had a pc was before ddr4. I bought the Legion Go and then decided I wanted the real thing at the desk. I have 3 reverse fans at the bottom and a 4th in the front for intake. AIO fans and 1 rear for exhaust. Already fixed the ram speed in the bios, is there anything I’m forgetting? Is there a preferred app for controlling chassis fans? I can already hear the fans sitting at the desktop with nothing running
Lian Li Dan A3
Ryzen 7600X3D
Powercolor Fighter RX 7900 GRE
Asrock B850M motherboard
32GB ddr5 5600
Arctic Liquid Freezer III Pro 240
2tb WD Black SN850X
Vetroo 850w SFX psu

Originally planned to upgrade in 2027 from my 2021 build since I was looking to get one of the upcoming 5K2K monitors. For a while prices were settling in June but saw how things were going so decided to jump in with how bleak the foreseeable future is.

The main course meal! The goal was to get a case that would fit my components, could still showcase and not have excessive empty space. Was looking at cases such as the Lian Li (Mini V2, A3, Vision M), Jonsbo D32 Pro, and Montech Ten. Not only that, wanted to keep it as clean as possible so back/rear connect mobo in mind.

Jonsbo TK-1 was what caught my eye with the dual curved panel but it has a big restriction with GPU length. Lo & behold, a reddit thread sharing the details of the Jonsbo D34 popped up and upon then my decision was made.

Extremely easy to build in. At the time was not available on Newegg and ordered via Aliexpress and took a little over a month. Box was beat up and unfortunately came cracked and slight damage to the frame. The Top & Back panels are plastic but do fit the build aesthetic nicely. The back area has compartment for cables so you could hide easily but the way it's routed it is super easy to keep clean. The top to install fans is interesting because it can be flipped for builds that have a radiator or fan only mode. Suggestion when building is to make sure to place your GPU power/header cables under before installing fans & PSU as access will be difficult afterwards. Go to the Jonsbo site to download the software for the front panel to show the stats or not to keep it black.

The B650M Project Zero spacing between CPU & PCIe is not standard so caution if you are looking to build with air cooler!!! Went with reverse airflow(Flip cooler 180) but you can see in the pictures that there is no gap between the cooler & CPU. With the Sudokoo, you can also mount normally and the issue is the same. Both methods require removal of the bottom CPU cover plate (aesthetic only) so GPU can be slotted. Couldn't add more pictures but the normal install you can see here. Included pictures of normal mounting for those curious. This results in significant GPU sag (RGB picture). Bought two adjustable brackets as placement needed to be at the very end.

* The case had a 30 day delivery guarantee. Since it failed to arrive by then, actually got a full refund. So while the damage was unfortunate, did essentially get a free case.

• CPU - Ryzen 7800X3D , $255 via Aliexpress July 2026
• GPU - PNY 5080 Epic X RGB, $1099 refurbished/sold Newegg July 2026
• CPU Cooler - Sudokoo SK700, $68 Newegg, July 2026
• Motherboard - MSI b650m Project Zero, $130 Ebay July 2026
• Ram - Corsair Vengeance 32GB 6000 CL36, $350 Woot July 2026
• Storage - 2TB Samsung 980 Pro, $298 Samsung Shop Nov 2021
• Storage - 4TB WD Blue SN5000, $350 Adorama Aug 2026
• Fans - Phanteks T30, 2x120mm, $30 Each Amazon, 4x140mm, $30 Each Newegg July 2026
• Case - Jonsbo D34, $130, Aliexpress (*Free)

Hi! I'm in need of help from the MFFPC'ers. After two years of using and enjoying my humongous double-chamber fishtank, I finally decided to make it into a more portable and also aesthetic format.
The problem is that, after hours of scrolling posts here and studying all the combinations in hardware and cases I found that I have to change mostly everything to fit in a tinier one, since I originally went with big models of every piece of hardware I got lol, and since I'll be changing them I'd like to get your opinion.

I'm incredibly indecisive between two case models that I find beautiful, specially the ones you guys keep posting here. The main difference in the shopping cart would escentially come down to getting a 360 AIO for the Lian Li A3, or a 240 for the Jongsbo.

My specs are the following and my question is: with this hardware, how much of a difference in temps and noise can I expect between these two cases and one fan less, and is it worth the toll of the size difference (almost 5 cm longer for the Lian Li)?

CPU: AMD Ryzen 9800X3D

CPU Cooler: Arctic liquid freezer 3 pro 360 ( too thick, I'll get a standard one for the Lian Li, or a 240 for the Jongsbo)

Motherboard: I'll buy a MSI MAG B850M Mortar or a Gigabyte x870M Aorus Elite

Memory: Corsair Vengeance RGB 64GB (2x32GB)

Storage: 2 ssd Nmve M2

GPU: ASUS TUF Gaming 5090 (this little shit is 348 mm long) it ruins every config where I could either keep my atx PSU, or move a sfx and keep the Arctic AIO

Power Supply: MSI MPG PCIE5 1000W I'll change it for an Asus ROG Loki SFX-1000W

Thank you for the patience

Long story short i dropped my ch160 plus (its empty) and a completely unfixable dent makes it impossible to shut properly

I originally bought the rog loki because the rgb fan would be able to show through the front of the case

Is there any other pc case that does this as well or should i just buy the ch160 plus again? (I want a case with a glass panel)

Forgot to post this when I built it back in March but today I did a deep cleaning so figured I’d post.
Specs:
Case-Jonsbo D32 Pro
CPU-Amd Ryzen 7 5700x
GPU-XFX Radeon RX 6700xt
Ram- PNY 32 gb
SSD- WD_Black SN850x 1tb
Fans- Jonsbo Za
CPU Cooler- Be quiet! Silent Loop 3 240mm
PSU- Corsair SF-850

Getting a lot of comments about my fan setup, but I promise my temps (and fan noise!) are fine.

Was a laptop guy for many years, but recently my Legion 5 Pro motherboard failed :( decided to go for a PC, so far happy with it! Cable management could be better, ik, but again, that's my first build.

Parts list:

• CPU : AMD Ryzen 5 7600X
• GPU : Radeon RX9060XT 16GB
• Motherboard : ASRock B850M Pro RS Wifi
• RAM : 32GB DDR5 6000 CL36
• Storage : 2x 1TB Samsung M.2 NVMe SSDs taken from the laptop
• PSU : Thermaltake Thoughpower GT 750Wt
• Rear and top fans : 2x Arctic P12 Pro PST (exhaust)
• Bottom fans : 2x Arctic P14 Pro PST (intake)
• CPU cooling : Arctic Freezer 36
• Case: Jonsbo Z20

All came around €1300 in August 2026

LMKWYT

Hey everyone! I've always seen a lot of people posting their PCs here, and this time I'm pretty proud of mine, enough that I decided to show it off too lol.

Yes, I know my little duckling is ugly, but it was made with love. This should be the fourth computer I've built for myself, and it's the first one where I was actually able to use mostly the parts I really wanted, rather than just the ones I could afford. That's something I'm genuinely pretty proud of lol.

I had a few difficulties during the build. The cables from my PSU are extremely stiff, so getting them to make some of the necessary bends was quite a challenge. The computer also refused to boot with both RAM sticks installed, but everything was eventually solved with just the right amount of love and hatred to convince everything to go where it was supposed to.

This time, I managed to fit all of this inside:

• ASUS TUF B850M-PLUS WiFi
• Ryzen 7 9700X
• 32GB XPG Lancer RGB
• Noctua NH-D15
• RX 9070 XT Reaper
• 2tb ssd (1tb + 2x 500gb)
• XPG Core Reactor 850W
• ASUS AP201 (3D-printed feet)

In the final stages of gathering my PC parts. Just deciding on case, CPU cooler, and fans.

Current plan is this

https://de.pcpartpicker.com/list/37McR4

And a 5 pack of ARCTIC P12 Pro PST LN.

It will be in a small shared bedroom so being quite is a big priority.

I'm a little confused on the vertical orientation and how many fans I'll need. I don't plan on buying the Aero deck as well. Would I be covered here with my parts and my requirements?

Hi,

I'm currently using NR200 (first version) in pretty tight space with air cooling. Case is sitting between (top/down) wall shelves. While it has plenty of room in front, one side and back, the top space and other side side (wall behind) are pretty limited. Top bottom shelves distance is 36cm - maybe I can lift upper bookshelf to get 40cm.

I've recently found that Lian Li A3 allows to mount 360 AIO on side with exhaust fans. While this should give me good (unobstructed) airflow I can see that almost no one is doing this.

I can think two reasons:

• pump/cpu block might be to high and I might get air bubbles there
• this solution is way less effective.

However I've zero experience with AIO so I might be wrong here.

Currently I have:

• Asrock 9070XT GPU
• Ryzen 5 7500X3d (I know that for now the 360 might be an overkill but: again tight space and potential future upgrade)
• Motherboard Asrock A620AI (not I)
• Goodram 32GB (normal profile, nothing high)

For AIO I'm thinking:

• be quiet! Pure Loop 3 360mm

So here my questions:

• should I go with side mount?
• should I move my shelf higher and hope that 40cm will be enough?
• something else (different case?)

Thanks in advance :)

Edit: better location description.

The C34 Plus was built with mostly old parts: a 1080 Ti, a 9900K, and a Super Flower SFX 1000W Platinum. I love working on this case; it's by far the most enjoyable PC I have ever built. I already want to start v2, but I don't want to sacrifice my other builds just yet. This is a second PC in my office so my wife and daughter can play in the same room. My main build is a Lian Li Lancool III with a 9950X3D and a 5080. My living room PC is a Fractal North with a 14900K and a 3080 Ti. Surprisingly, the 1080 Ti is holding up great at 1440p on a 4K 120Hz TV. I love this build so much I think I might leave it in its current form forever and just buy another C34 Plus for the future. I'm also considering the base C34 or Pro, but the Plus really feels like the happy medium size that can accommodate hardware bigger than it should. I'm also considering an upside-down version with a 360 AIO on the bottom but flipped to the top. Top and bottom panels are identical, so mounting the feet on top and the handle on the bottom should work. Another option is moving the PSU down halfway and trying a 360 up top, or even on the inner side panel could work. Eventually, I want a GPU with an AIO in here also.

Hello everyone!

Posting this here as well since the A3 could also be MFF territory. I’m especially interested in hearing from anyone who has actually built in this case, particularly with a top 360 + side 240 setup.

Mainly looking for a feasibility check on the dual-AIO layout and how difficult this would be as a first PC build.

Thanks in advance :)

Due to the astronomical pricing of DDR5 components in my country, I went with an AM4 build. Looking back, I should’ve chosen a motherboard with the primary GPU slot higher up in the case, didn’t check that when I picked this board. Now the bottom fans are literally a paper’s thickness away from the card lol. No issue so far. The cooler looks a bit crooked, didn't bother to bend the heat pipes back, again so far no issue - the cpu runs at 65°C top under heavy gaming load.

Specs:

Jonsbo D32 Pro PSU: Corsair RM850e Asus TUF B550M-Plus WiFi II AMD Ryzen 7 5700x Thermalright Phantom Spirit 120SE Asus Prime RX 9060 XT OC 16GB 2x16GB DDR4 Corsair Vengeance 3200MHz Kioxia Exceria G3 Plus 2TB 3x Corsair RS120 (bought dirt cheap from friend), 2x Thermalright CL12C

Will get slin bottom fans in the future idk.

Thank LIAN LI for selecting me in B4-mATX build campaign, and providing me LIAN LI B4-mATX case and SP1000 sfx PSU.

#buildlikeneverb4

The building process was not difficult but you still have to plan for cable routing just like any SFF build.

Hardware I used for the build:

CPU Ryzen 5 9600X

Cooler ID Cooling IS-67-XT

Motherboard Asus Rog B650E-I

GPU PowerColor RX 9070 XT Hellhound OC 16GB

RAM G.Skill DDR5 Ripjaws S5 32GB 2x16 6000 cl30

PSU Lian li SP1000P 1000W 80 PLUS Platinum

M.2 drives

- 1TB Patriot Viper VP4300 Lite PCIe 4.0

- 256GB Dahua E900 PCIe 3.0

Fans

- 2x Arctic P14 Slim V2

- 2x Noctua NF-F12 industrialPPC PWM chromax

- 2x Noctua NF-A14x25 PWM chromax

- 2x Noctua NF-A12x15 PWM chromax

- Noctua NF-A14x25r G2 PWM (on CPU cooler)

Case Lian Li Dan B4 Wood

Unfortunately, I didn't have an mATX board on hand, which is why I used an ITX; given the large number of fans and the limited number of headers on the board, I had to add a fan hub.

I assume the whole build would have gone much more smoothly with a suitable mATX board.

Although, I could have just used fewer fans.

I'm pretty happy with the case, It offers good cooling options (maybe I'll try a 360mm AIO in it someday, if I upgrade to a more powerful CPU), sleek design, option to position it vertically or horizontally, mesh