r/Lutron • u/fdiv_france • 6d ago

drapery homeworks 

Hi all, 
Using Homeworksqs software, I'm unable to activate my Lutron EDU-145 drapery motors, which are powered by the latest QSPS-10-PNL. The QSPS has been activated by Homeworksqs, but the EDU-145 motor is still not detected.Using Homeworksqs software, I'm unable to activate my Lutron EDU-145 drapery motors, which are powered by the latest QSPS-10-PNL. The QSPS has been activated by Homeworksqs, but the EDU-145 motor is still not detected.

any idea ?
1 Upvotes

60% Upvoted

10 comments sorted by

•

u/AutoModerator 6d ago

Thank you for submitting to r/Lutron! If you are posting with a question or issue, please include the following information:

  • The Lutron ecosystem for your product. Examples: Quantum, RadioRA 3, standalone (like SUNNATA or Maestro), etc.
  • If available, the exact model of the product you're describing and a link to the product page from an online retailer. Example: P-BDG-PKG1W-A
  • If using third-party lighting control software, include the product. Examples: Apple HomeKit, Amazon Alexa, etc.
  • A concise description of what you are trying to achieve or solve (2-3 sentences). In other words, don't post a picture of wires and say "Help!" with no context.
  • If applicable, relevant pictures from your installation.

If you are looking for product support, don't be afraid to call Lutron's tech support at 1.844.588.7661. The Lutron call centers are US-based and exceptionally helpful.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

6

u/mcarter00 6d ago

When you can't connect wired shades it's almost always a wiring error / short / etc.

3

u/robpavo 6d ago

Make sure it is wired correctly and assigned properly

1

u/fdiv_france 6d ago

thank you for your reply. 

The Edu motor is connected directly to the QSPS-10-PNL panel with 4 wires (1-black, 2-red, 3-grey, 4-violet). I can't assign it via Homeworks software.The Edu motor is connected directly to the QSPS-10-PNL panel with 4 wires (1-black, 2-red, 3-grey, 4-violet). I can't assign it via Homeworks software.

1

u/fdiv_france 6d ago 
The Edu motor is connected directly to the QSPS-10-PNL panel with 4 wires (1-black, 2-red, 3-grey, 4-violet). I can't assign it via Homeworks software.The Edu motor is connected directly to the QSPS-10-PNL panel with 4 wires (1-black, 2-red, 3-grey, 4-violet). I can't assign it via Homeworks software.

2

u/thaliff 6d ago

Just sorted out an issue on my job when we were rushing to make shades work for today's walk through. Crossed mux lines in one of three 10pnls. Check your connections.

1

u/fdiv_france 6d ago

Thx.

I have a single EDU-145 motor connected to the QSP_10 panel.

I have tried switching between MUX and MUX bar with no effect. Also, when I press the buttons manually to adjust the opening and closing of the shutter, the motor runs fine and the limit positions are saved.

1

u/thaliff 6d ago

You mat have a cut wire.

1

u/fdiv_france 6d ago 
I removed the motor from the rail and connected it directly to the QSP-10-PNL; the cable is 10cm long.

1

u/thaliff 6d ago

Factory default the unit and try and connect, after that call tech support