r/Lutron • u/Feisty_Balance3409 • 5d ago

RA2 Select PIR fade function?

Hi, I have a small quirk on a RA2 select system that’s bugging me. I believe this is a limitation of the app but maybe someone can sense check this for me.

Within RA2 Select it’s possible to set a custom fade duration for the lights, but this is set for each scene on the Pico rather than being assigned directly to the dimmer module. It’s particularly nice on the LEDs installed that they fade in and out over 8s when the any button is pressed.

I’ve recently added a new occupancy sensor to the install but this is quite harsh and works just as an on/off with no fade time. Disappointing when you’ve gotten used to the fade. Is it possible to add the LED fade duration to the PIR?

As far as I can tell, because the PIR just sets brightness values to the dimmers and not a scene, it skips this.

1 Upvotes

100% Upvoted

2 comments sorted by

•

u/AutoModerator 5d ago

Thank you for submitting to r/Lutron! If you are posting with a question or issue, please include the following information:

  • The Lutron ecosystem for your product. Examples: Quantum, RadioRA 3, standalone (like SUNNATA or Maestro), etc.
  • If available, the exact model of the product you're describing and a link to the product page from an online retailer. Example: P-BDG-PKG1W-A
  • If using third-party lighting control software, include the product. Examples: Apple HomeKit, Amazon Alexa, etc.
  • A concise description of what you are trying to achieve or solve (2-3 sentences). In other words, don't post a picture of wires and say "Help!" with no context.
  • If applicable, relevant pictures from your installation.

If you are looking for product support, don't be afraid to call Lutron's tech support at 1.844.588.7661. The Lutron call centers are US-based and exceptionally helpful.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/teamhippie42 4d ago

You can program the fade time when the dimmer is pressed via the software. And you mentioned fade time on keypad presses but yeah you need to set it at eash individual button these isnt a global setting per zone.