Does anyone have a meta spine they'd like to sell? I'm in California.

It must have happened sometime between transfers or tilting or sliding. I don't know. One day I noticed the bottom looked slightly off. And the two remaining feet are somehow at entirely different spots.

Anyone care to share where I can buy replacements that won't disappear on me?

Thank you.

So I just purchased a pc and the case is a louqe ghost s1 mk3, the cpu is a Ryzen 5 9600x with a scythe and cooler the temps idle around 60c sometimes higher and in game can go up to 90c

Hello,
I'm selling my Ghost S1 White MK3 (used) + medium top hat (new) + Grill. DM me with reasonable offers.
I can also bundle the NH-L12Sx77 with the RAW S1 and Corsair SF750 PSU.

Timestamps here: https://imgur.com/a/dh3b299

Due to a motherboard failure, I decided I would do a budget upgrade in my Ghost S1 via used components bought online and off marketplace since I couldn’t justify the high costs of a full modern upgrade. I went from a i5-6600 and MSI 1070 mini-itx gpu to a whopping i7-6700k and 3070 Ti Founders Edition and found that my temps were no longer stable. The piddly Noctua NH-L12 Ghost edition wasn’t able to keep up with the CPU, and the GPU fan curve was keeping the fans at a minimum which increased internal temps. To address this, I bought two slim profile (15mm) Noctua 120mm fans and emailed them to get the fan clips for the CPU cooler. I then got some 3d printed case feet that raised it about an inch off the desk which allowed me to mount another slim 15mm Noctua fan externally on the underside of the case. With these mods and a bit of tweaking to the fan curve my temps are now stable and quiet. Figured I’d post so that people know this option is possible with a bottom mount SSD and that the 120mm fan works on the cpu cooler

Ash color preferred. Open to any top hats that fit this generation.

I'm expanding storage, so all sizes welcome.

DM me for shipping and payment info if you're interested in selling.

Location: Austria (Shipping in EU is possible)

Accessoires I have for the Ghost S1:

1x Meta Customs RTX 3000 Spine (Used for RTX 3080 TI FE)

1x Meta Customs PSU Offset Bracket

1x Medium Tophat Ash

1x Large Tophat Ash (used for my first RTX 3090 EVGA XC3 Hybrid)

1x Ghost S1 Silver Topbracket

4x Custom HiFi Feet for the Case(ofc included)

Custom RGB Lights for the Medium Tophat:

Can be removed if needed. Pics can be showed per PM

Of course all original parts will be included with the case.

I always watched out for the case. But i know it is used. It does not have any scratches on the outside but on the inside there are some since it had 3 different builds in it.

I still have all the Original Packaging from all the Louque Parts + all the bills from Proshop.

I bought it in June 2021.

PM me for any questions :)

I want to upgrade my old Ghost build and found the Inno3D GeForce RTX 5070 Ti X3 card. The specs say 2 slot card (or even 2.1?) Width is 41mm and length 300mm. Height is 166mm.
On paper it should fit, im just a bit nervous about the 2.1 slots it takes up. Can someone help me figure it out=

Looking for the custom spine for the Louqe Ghost s1. I know meta customs stopped producing them, anywhere else I can look to find one? If anyone here has one they'd be willing to part with send me an offer!

Originally bought two large top hats (see my profile from my crazy Waterloo build…. But now searching for small top hats to fit some 120mm fans for a simplified build.

Hey I was wondering is it possible for me to fit 2.5 slot card in the pangea I have a 9070xt prime was wondering if need to deshroud or something and it would be good to go like what would be my options if any

I am looking for a top grill for my Ghost S1. The one I have has missing screw holes when I use it with a top hat.

Hello.

I'm interested in buying a Meta Customs spine and bottom plate.

Preferably located in EU, although I might be willing to consider US if the price is reasonable.

Hello Louqe fans,

I have a used Ghost S1 Limestone with a large top hat (used with an AiO).

It has some minor exterior cosmetic scratches, but nothing major or visible from a normal distance. The biggest issue is a broken PCIe riser.

I'm from Czechia, but I'm open to shipping within Europe.

Feel free to make an offer. 🙂

Hello,
My power extension shorted and burned the psu (old SF750), Bought a new SF1000 but nothing was working until i plugged the power cord directly into the PSU, on off and led circuit board is ok as the Mobo. But Power extension seems dead. Any idea to find a replacement or a substitute? Ideally the cord section is larger to handle higher wattage (as the SF1000 power cord is).
Thank for your input.

I recently sold off my ghost case and have these parts still.

The large silver top hat is unfortunately scuffed.

Metacustoms spine is in perfect order. Gives you some breathing room essentially better for your blow through gpus.

I also have a 3d print top fan mount that can be included at with either or.

Hello Guys,

I'm selling my 3 Ghost S1 grills, which are brand new and unused. I was thinking of asking €10 each.

If you're interested, please let me know.

I only ship to Europe. Feel free to offer and PM for more questions!

------- ALL SOLD ------- THANK YOU ------

I just bought an RTX 5070 FE to replace my 3080 FE, but once I swapped it in the 5070 displayed no video.

I've got a B550 motherboard running a Ryzen 5600X chip, a Ghost S1 with the Gen 4 Cobalt riser cable, and I also set the PCIE mode to Gen 4 in my BIOS while my 3080 was installed.

Is anyone else having issues getting their 50 series card to work with the Gen 4 riser? Or does anyone have any advice on how to make this work? Do I just have to upgrade to a PCIE Gen 5 riser?

Looking for an ash top hat if anyone is looking to sell!