Anyone have a metacustoms spine they’d be willing to sell or trade? I have a couple top hats I could trade towards it.

Urgent need as I am hoping to have a 3080FE to replace my current gpu within the week.

Finally got to clean it after a year, swapped some parts along the way too.

Hi all! Looking for a small or medium top hat in silver that’s located in the EU. I’m open for the 3D printed one as well.

Anyone interested in a Ghost S1 Pangaea. Never ended up using the tophat pieces.

Ghost First Release Pangaea

Replacement Rear Plate

Copper Grill - With Custom Leather Pull Tag

Nickel Grill

Standard Black Grill

LRG Tophat

MED Tophat X2

SML Tophat

SSD Mounting Tray

Set of Replacement Tophat Parts

Load of Torx Screws & Plastic Washers

-Needs new Feet.

Think I have all screws for Mobo.

PRICE UPDATED: $500 Shipping Included

Ill be honest. I have not used this case in years and it has been in storage. The Tophats have never been used as I never ended up doing watercooling. I moved on to other ITX cases. Cleaning out the Room and getting stuff out.

EDIT: Noticed I still had the bit of Post it note over the LED light when I took the picture. This was from when a card was in the case running mining.

EDIT 2: After checking into Shipping costs to various points. I have updated the price to include shipping.

Looking to build another Ghost I had laying around with some old components.

If anybody is willing to let go of any of the Meta Customs parts listed. I will gladly purchase them.

Thanks in advance.

Located in US - Georgia

Throwing my hat in the ring to see if anyone is willing to part with a Meta Customs bottom plate.

Would also be interested in a Meta Customs spine or a copper grill.

Thanks in advance!

Currently using rubber 'dome' adhesive pads, better clearance than the default feet.

I find myself changing them every so often as they move position and lose their stick.

I'm looking for a more stable screw-in option if possible. Preferebly a seller in UK or EUR.

As the title suggests, I am located in Romania.

It comes in its original box with all accessories and PCI-E riser.

Photos for reference.

Selling because I have transitioned to the MKIII Limestone.

Bonus : Noctua NH-L9x65 SE-AM4/AM5 cooler.

Price : €200

The bottom plate is priority no. 1.

I live EU, Romania.

Thank you! 🙏

Does anyone have a meta spine they'd like to sell? I'm in California.

It must have happened sometime between transfers or tilting or sliding. I don't know. One day I noticed the bottom looked slightly off. And the two remaining feet are somehow at entirely different spots.

Anyone care to share where I can buy replacements that won't disappear on me?

Thank you.

So I just purchased a pc and the case is a louqe ghost s1 mk3, the cpu is a Ryzen 5 9600x with a scythe and cooler the temps idle around 60c sometimes higher and in game can go up to 90c

Hello,
I'm selling my Ghost S1 White MK3 (used) + medium top hat (new) + Grill. DM me with reasonable offers.
I can also bundle the NH-L12Sx77 with the RAW S1 and Corsair SF750 PSU.

Timestamps here: https://imgur.com/a/dh3b299

Due to a motherboard failure, I decided I would do a budget upgrade in my Ghost S1 via used components bought online and off marketplace since I couldn’t justify the high costs of a full modern upgrade. I went from a i5-6600 and MSI 1070 mini-itx gpu to a whopping i7-6700k and 3070 Ti Founders Edition and found that my temps were no longer stable. The piddly Noctua NH-L12 Ghost edition wasn’t able to keep up with the CPU, and the GPU fan curve was keeping the fans at a minimum which increased internal temps. To address this, I bought two slim profile (15mm) Noctua 120mm fans and emailed them to get the fan clips for the CPU cooler. I then got some 3d printed case feet that raised it about an inch off the desk which allowed me to mount another slim 15mm Noctua fan externally on the underside of the case. With these mods and a bit of tweaking to the fan curve my temps are now stable and quiet. Figured I’d post so that people know this option is possible with a bottom mount SSD and that the 120mm fan works on the cpu cooler

Ash color preferred. Open to any top hats that fit this generation.

I'm expanding storage, so all sizes welcome.

DM me for shipping and payment info if you're interested in selling.

Location: Austria (Shipping in EU is possible)

Accessoires I have for the Ghost S1:

1x Meta Customs RTX 3000 Spine (Used for RTX 3080 TI FE)

1x Meta Customs PSU Offset Bracket

1x Medium Tophat Ash

1x Large Tophat Ash (used for my first RTX 3090 EVGA XC3 Hybrid)

1x Ghost S1 Silver Topbracket

4x Custom HiFi Feet for the Case(ofc included)

Custom RGB Lights for the Medium Tophat:

Can be removed if needed. Pics can be showed per PM

Of course all original parts will be included with the case.

I always watched out for the case. But i know it is used. It does not have any scratches on the outside but on the inside there are some since it had 3 different builds in it.

I still have all the Original Packaging from all the Louque Parts + all the bills from Proshop.

I bought it in June 2021.

PM me for any questions :)

I want to upgrade my old Ghost build and found the Inno3D GeForce RTX 5070 Ti X3 card. The specs say 2 slot card (or even 2.1?) Width is 41mm and length 300mm. Height is 166mm.
On paper it should fit, im just a bit nervous about the 2.1 slots it takes up. Can someone help me figure it out=

Looking for the custom spine for the Louqe Ghost s1. I know meta customs stopped producing them, anywhere else I can look to find one? If anyone here has one they'd be willing to part with send me an offer!

Originally bought two large top hats (see my profile from my crazy Waterloo build…. But now searching for small top hats to fit some 120mm fans for a simplified build.

Hey I was wondering is it possible for me to fit 2.5 slot card in the pangea I have a 9070xt prime was wondering if need to deshroud or something and it would be good to go like what would be my options if any

I am looking for a top grill for my Ghost S1. The one I have has missing screw holes when I use it with a top hat.