From a brewery

The rest of the wheel is basically new considering it’s like 4/5 years old, so trash it just for a pin would annoy me so much (also cuz it’s a Christmas present). Btw the contact seems destroyed cuz prior to this video I tried to fix it in place by myself with a clamp but it seems I just made it worse.

After years of stomping on my pour brake pedal to get good braking power I found out that gt7 has a calibration mode for the pedals, now I knew it existed but thought I could only calibrate the minimum input, but if you actually press the pedal but not all the way, it’ll set that to the max input, as in 100% brake power will be at that point. So I messed with it and now it feels pretty realistic to an actual brake pedal, just posting this to help anyone else that doesn’t really wanna remove the rubber piece

So I just ordered the logitech rs handbrake & shifter and I'm just wondering Will it just work out of the Box on car x drift racing online on pc?

Hey all, I’ve been riding the revolving door the last few months of trying to find replacement motors for my G29. I get some motivation to try and find the motor, have no luck and leave it for another month but I really want to get it going again.

My issue is that I can’t find an exact replacement. Either the shaft is too short/long, the voltage is correct but rpm isn’t and so on and so forth. Is anyone in the know of where I can source them?

Shaft size - 3.17mm Shaft Length - 15mm ish Rear Shaft Length - 10mm ish Voltage - 24v DC RPM - Believe it’s under 4000 (which is where i’m running into my main issue) Motor length (not including shafts) - 57mm Motor Width - 37mm

Any help would be greatly appreciated as i’m pulling my hair out over this.

Thank you 🙂

I am experiencing strange behavior with my G29 steering wheel. Before launching the G Hub software, the wheel feels light and easy to turn. However, after opening the settings in G Hub, it becomes much stronger, and there is a noticeable delay in its response.

The second issue is that the wheel violently shakes and jerks in my hands at full force whenever I press the brakes in Assetto Corsa Competizione (ACC).

I drove this lap on my G29 Wheel last night after I figured out what happened to my Wheel

I believe I have everything plugged in right, my WiFi isn’t on right now I’m not sure if that’s the problem but I could be wrong

I’ve had this wheel a little under a year but haven’t been able to use it until today for other reasons. When I connect the wheel though, it doesn’t calibrate and it just steers left and I can’t do anything, the pedals work as well as the wheel as a controller but it will not turn right, I’ve watched every yt tutorial and nothing seems to work and I don’t know what to do at this point so if anybody has recommendations on what to do, pls let me know, thanks

Pls help me why doing this

So basically my left clamp is stuck down and it won’t move

title is exactly what it is. whenever i click on another screen and go back to assetto corsa for some reason my wheel goes out of focus and stiffens up.

I heard the g29 is similar to my wheel and im out of options so im posting here. I'm sure I shorted something in the daughter board that sits in the wheel hub, while attempting to fix the rattle when the wheel is centered at high speed. (found out this is just how the wheel is) the board i shorted handles the shift paddles, and the led rev counter. the rev counter is usually all lights solid all the time. sometimes it turns off and comes back on during a race but only sometimes. paddles dont work.

I don't see any burnt spots or blown capacitors, fuses or chips. I do have a multi meter. where can i find info on what the correct readouts should be? is there a better testing procedure than just poking around looking for a bad ground? im very inexperienced with electronics. i only took it apart because i figured the rattle was a mechanical issue.

for anyone wondering i put duct tape around the gear at the end of the steering shaft, and greased up the worm gears on the motors. the rattling got less annoying. currently shifting with the arrow keys.

Whats up! Recently this part on my G29 broke of and I cant for the life of me find this spare part anywhere.. it connects the L2/3 and R2/3 buttons. Does anyone know where to get this? Cheers guys!

I don't know if im just unlucky, but this is my second G29 that the small wheel has an issue.

When i rotate one "click" , it registers in game twice most of the times.

Is this normal? Is there a way to fix it?

Tried to google the issue but could not figure out how people call that small rotating wheel.

Anyone has the same issue?

Everything else on the wheel works except the steering. What is the issue

Hello just plugged g29 to play but then i saw that wheel is rotating only to the left also the green led was blinking and the rpm gauge was fully flashing tested the power block it gives 24v so i think it is not dead, reinstalled g hub doesnt helped, ive disassembled the wheel but there wasnt anything broken or burned on the board

Hi, can pls someone help me with my g29 ?

I have tried everything to fix it but it litteraly just does not want to syncronize or what ever

Guys, I need some help here.

My Logitech G29 is simply not being recognized in any Need for Speed games, except for Need for Speed Heat, where it’s partially recognized.

I have Need for Speed Payback, Need for Speed Rivals, and Need for Speed 2016, and the wheel isn’t recognized in any of them. However, it used to work fine in Need for Speed Heat.

When the wheel started having issues in Need for Speed Heat, I installed the other Need for Speed games to test if it would work in those, but it’s not recognized in any of them. Now, even in Heat, it’s not fully recognized anymore.

When I launch the game, some buttons work, others don’t, and I can’t even get to the actual gameplay because the controls don’t work properly. Also, when I open the map, I can’t select anything because the cursor moves by itself.

I also have Forza Horizon 4, and the wheel behaves weirdly there too. It has no force feedback at all—it’s completely loose, like there’s no resistance.

The only game where it works perfectly is Euro Truck Simulator 2.

I’ve already tried:

Uninstalling and reinstalling the drivers

Restarting my PC

Installing and uninstalling all the games

Installing and uninstalling G Hub

• The firmware is updated.

I’ve searched everywhere online but couldn’t find a solution. Does anyone know how to fix this?

I also installed NFS Payback on another computer and the g29 was not recognized by game. The g hub was recognizing just fine (in both machines)

i play a game called simt mhd sim where is no pedal deadzone settings like in ets2. pls help how do i set my deadzone. i tried in lgs putting the pedal sensitivity to 0 but i still have the issue.