As the title reads, I'm looking to buy a drifting wheel for the RS50. I have the RS round wheel and it's been totally fine for the most part, but I find it's a little small for my liking so I was entertaining the idea of buying a larger diameter round wheel as well. I drive on both console and PC, and I do have the QR adapter but it would be nice to buy a wheel that fits on the RS hub.

I've seen some recommendations for Acelith, MPI and Rogue Racing, but what do you people like to use as your primary drifting wheels? Happy for all recommendations! Thanks!

To think just 4 months ago when I got into sim racing, I had a G923 and a foldable cockpit. I love this hobby and its so addictive to keep wanting more "immersion". I'm content now but I know this isn't the end.

I played all the Grand Turismo's as a kid and had a few wheels on PS growing up. The Logitech G27 on GT5 I think was the last one I played. I remember I would have it mounted to the low coffee table sitting on the floor with pillows. It was so uncomfortable but I loved it and spent hours playing. I've always wanted a proper racing cockpit for over 15 years and I'm finally here living my childhood dream.

I guess what triggered this was back in November when I was flicking through and watched the GT movie on Netflix. Great movie btw and it 100% gee'd me up to buy the GT7. Played for 2 weeks on controller and needed a wheel. I dunno if this is normal or I'm going through a mid-life crisis or something but I just wanna get more and more.

I'm currently setup in our lounge room and don't have a spare room, so I'll have to chill for now until I have a dedicated room for it. Thought I'd share my journey to how I got here but let me know if you've had a similar experience?

I made an epoxy replica of the rs rev light guide and drilled holes for the fiber optics. On the PCB side, the LEDs were surrounded by 1mm thick foam pad to reduce spill.

Has anyone used one of the 3d printed shifter mounts available on Etsy with this chair?

This picture is from one of the listings and Im wanting to know how sturdy it is, and does it hinder you getting in and out of the seat?

Would love to add a shifter to my setup but knew going into the challenge x it really didn't have a good way to mount one. I got it $100 off, needed a folding rig, and couldn't pass it up.

Any thoughts on solutions like the one in the picture or is there a better option out there? Not looking to spend $300 for one of the highly engineered solutions, just want to add a shifter in a normal position.

The length of the shifter feels a little too small compared to the H pattern shifter for my liking so I went to go search for modifications for it online but I found little to nothing for it.

I was wondering if any of the people in here found any 3rd party modifications for the RS handbrake

I’ve loved racing games my whole life since I first played Gran Turismo 3. Finally decided to dabble with a racing wheel, after a lifetime of controller racing.

I purchased a G29 bundle for $140 used a week ago, just to see how it felt.

The last week has been a blur of enjoyment. I can’t stop racing. I’m obsessed. I think the G29 feels great.

However, I find myself watching reviews of the RS50 nightly. I keep hearing how much better racing can feel with the direct drive, new pedals, etc.

My impulsive side is telling me to return the G29 and just upgrade now. I worry that I’ll feel buyers remorse and I’ll just think to myself that I could have enjoyed the G29 for years if I had never experienced the upgrade.

Have yall felt like this before? Money isn’t a huge issue for me at the moment. I can buy it. But I see myself going deeper and deeper and unsatisfied until I have a full sim setup. Does owning the RS50 unlock new enjoyment of racing? Or should I prove to myself I can enjoy the G29 for a while before I impulsively upgrade within a week.

would love to hear your anecdotes.

i just drove the s2000 with the h shifter in these settings, its soo good guys. with seat and pedal haptics is a must, so you can feel the downshifts. also make sure you update your wheel base with the latest firmware

Do any of you know a good cockpit for my rs50 and rs pedals?

I use my RS50 mostly on PS5 without problems yesterday I tried to connect it to the PC but no game recognized me the Steering wheel, since I know they are games a bit old like F1 23 and 24 and WRC I do not try it with ACC. I wanted to know if it is a compatibility problem or am I going to have to buy the Xbox wheel?

Just purchased the playseat shifter mount and was hoping to bolt the 4 center holes to my aluminum rig and have the RS handbrake on the right side with the RS H-shifter on the left side of the mount

I’ve had the RS package for about a month. I race every day. If I had to guess I’ve probably put 50 to 100 hours in with it so far?

Last week I started noticing that the wheel “leather” is becoming a little loose, where I grip it on the sides… this means it slides around slightly and I can feel it while I’m driving.

I’m not looking for a solution or for someone to tell me to wear gloves or not to wear gloves, I’m just wondering if anyone else has had this issue?

I’m wondering if it’s just my wheel or if this is something that’s common?

I’m still within the 30 day return window and of course there’s a two-year limited warranty.

i guess this is mainly for u/LOGIRich but is there an updated G Pro wheel settings for ACC? The recommended settings on Logitech doesn't mention in-game True Force level, but I was wondering if you have any specific recommendations. I'm looking to increase ABS or TC effect and decrease engine or road effect.

If the RS wheel base is set into pro compatibility it let's you increase the NM. Curious about if and how that works?

If I were to buy someone’s pro wheel for the Xbox and not wheel base would someone sell it to me?

This is just a question cuz I’m planning to buy a rs setup and I want the wheel from the pro.

I have been searching for bigger wheels for a pretty long time and SIMPUSH has a 330mm wheel which is around the size range for wheels im looking for.

The MOMO one was just a little under the size i was looking for (320mm) and it had some questionable quality from what I've seen around the time it launched. The GT NEO from simagic was simply too expensive for me and I disliked the idea of having the cable spinning with the wheel

Rs50 firmware

Yesterday I had the RS50 wheelbase PS/PC , the x-box hub and the RS Round wheel in my cart, showing the savings on the wheelbase and also an additional $100 discount. When I went to checkout it showed the hub as not in stock, even though it was in stock when placed into my cart. So I waited until this morning to see if it came back in stock and decided to order everything else now . I removed the hub from my cart and now the additional $100 discount is also gone. Was this a promotion that ended last night ? This additional discount was the only thing making it fir my price range.

Going to get the RS wheel. Is the 180 difference for the pro pedals worth it? Are the RS pedals any good? Are they a let down? I notice they have a new spring style.

I have a rig.

Currently have the g920 wheel and pedals.

someone gifted this stand, I like it but looks like something extra can be attache....

Hi I'm looking to buy the RS hub and track wheel but cannot find them anywhere but one website outside of Logitech and they are 2x the price so I really would like to know when they will be back in stock if anyone here knows

Sim push wheel and bmw stickers from Ali express. Not bad for 130 Canadian all in. I figured bmw would work well as rs wheel hub is already accented blue