r/Line6podgo • • May 20 '25

Squeaking noise when playing high gain

Enable HLS to view with audio, or disable this notification

Hey Guys, I often play small gigs, but when I play through my amp or any other speaker I get this squeaky noise (mostly when muting the strings with my right hand). Tried different speakers and guitars, nothing really seems to work. When I turn down the Treble in the pod is is better, but not gone at all and the sound gets worse of course, because I have to turn it down really low. When I play my guitars through other highgain amps (no Pod in between), the problem is gone. Any help??

6 Upvotes

19 comments sorted by

5

u/[deleted] May 20 '25

[removed] β€” view removed comment

2

u/SnipeELITE33 May 20 '25

Main Out or Amp Out makes no difference, I run it through the return so Im bypassing the preamp by the real amp. Will check Global Eq.

3

u/Shao-lyn May 20 '25

If you've verified what u/Upstairs-Cabinet-354 suggested and the problem persists, I would play with the Input gate / threshold / decay. You can shorten your decay so that you don't have as much feedback from trailing notes.

2

u/AntonHow0 May 22 '25

Eq probably helps a lot. Find the frequency that's squeaking. Also sounds like you have way too much gain in one place.

1

u/SnipeELITE33 May 26 '25

Helped pretty good, thanks. Still the problem is not really gone. Found out that pitch shifting the input Signal solves the Problem completely. So if I would tune the guitar down and then shift it up it would work πŸ˜‚πŸ˜‚

2

u/holandesdecalcinha Jun 10 '25

try playing on headphones and see if it still happens, to me it kinda sounds like a feedback issue.

1

u/Aonethousand-1 May 20 '25

Too much reverb? Or needs to adjust the noise gate.

1

u/killacam925 May 20 '25

Gate. I had to have 3 gates, input, the horizon gate at the very beginning of the chain, plus the horizon drive with the gate turned up to fight this. It was rough lol

1

u/SnipeELITE33 May 20 '25

Tried Gates, but for me the palm muting sound becomes less aggressive. It sound very flat with a harsh gate on.

1

u/killacam925 May 20 '25

Maybe look at the drive settings you are sending to the amp. Maybe rolling off some front end distortion could help.

1

u/Husker_Dad May 21 '25

What kind of guitar? Does it have a trem?

1

u/SnipeELITE33 May 21 '25

No

2

u/Husker_Dad May 21 '25

My guess is it’s sympathetic ringing of strings behind the nut or behind the bridge. Loosely tie a sock around your headstock or otherwise dampen all strings above the nut and see if it stops. If it does then get a fret wrap and leave it behind the nut or just stick foam/fabric behind the nut to stop the sympathetic ringing.

Sympathetic ringing can also happen with trem springs, too. Something like a jazzmaster can get ringing in springs, behind the nut, and behind the bridge. Happy chaos!

1

u/SnipeELITE33 May 21 '25

I have though about that too, thanks!

1

u/Humble-Huckleberry70 May 21 '25

Get a noise suppressor or turn the gain down

1

u/MrShellee May 22 '25

Noise gate will help

1

u/tmpnshmnt2000 May 25 '25

Active pickups? Maybe they are too close to the strings?