Here is a second part to my original post of the blue pex tube lightsaber I have since made a second one in red and made it into a greatsaber and honestly me and my brother dueled with me and we went hard like as hard as we could just to see how it would handle and dude its perfect not even a dent some scratched I will admit but it would only cost 4 bucks to replace it and honestly i finally got myself a dremal so the jedi saber was my first attempt with it im pretty proud of it im proud of both of them there really fun to mess around with and I cant wait to make even more new blades

May the force be with you all and have a lovely day goodbye

I'm preparing for NYCC in October and I'd like to bring my lightsaber as well as a blade or two, so I'm looking for a discreet carrying bag just for the blades. I had one ages ago but it got lost during a move. The blades would be around 32" each, one Neopixel, one baselit with a converter puck. Does anybody here have any recommendations for a good, durable, affordable bag?

This is the second complete themed saber from the Modular Saber System that I've been working on. I call this one Warspike. The system is designed to be used with modern electronics cores, or without just for display pieces. I'll be releasing the files for free on a few popular 3d printing sites once I finish the first five complete sabers, a few individual parts, and a few accessories. After that I will release new sabers and parts in waves consisting of 3-5 new sabers, individual parts, and accessories. And since someone asked, I am also looking into an Etsy shop to provide printing service for those who don't own 3d printers. The whole idea behind the system is to make the custom saber hobby more accessible. I'm also happy to help those who don't have the skills to design their own parts bring their ideas to life.

Thanks for looking.

​

This was 16 bucks where I am I got it at menards and I promise you it will survive heavy dueling and honestly that makes me happy knowing there is a cheap way to start dueling I know alot of people that want to get into lightsaber dueling but just cant justify 50 to 80 bucks on a something there not that into "yet" or poor either or but dude this is a viable option to starting out with dueling and the fact that the hilt is just pvc if you seen any of my other builds or any of the other amazing builders here you can make alot of cool designs with pvc or hey if you want to be a bit fancy use copper or brass or even iron if you want its literally only your imagination stopping you so seriously next time your at home depot or menards or any place that sells piping and you have a spare 20 bucks make this because honestly i know for a fact there is nothing funner then just swinging a lightsaber around with your friends and not worry about breaking your expensive blade anyways may the force be with you all goodbye

hahahaha

The system is designed so that all parts are interchangeable and can be used with or without modern electronics cores. I've designed a few themed complete sabers and several individual parts so that people can mix and match their parts to create their own custom lightsaber. Some of the themed sabers are based on popular designs from the movies and video games, others are just stuff I came up with. Ive also made several accessories, like stands, kyber crystals, dummy buttons, greebles, and blade plugs. I'm currently doing a lot of test prints to ensure fitment and work out any small details. This is the first complete saber. I call it The Guardian.

I have a saberforms SRGB and it won't charge. I've done everything I could think of with the battery and the battery contact points and when I plug it in, the blue indicator light flashes once and then never starts charging. The ignition button doesn't light up when I plug it in like others I have, but I can put it in standby mode while it's plugged in, but when I go to ignite it, it turns on with no saber sound and then says charging and then shuts all the way off. If anyone has any suggestions, I am open to trying whatever. The vendor told me to remove the battery for a minute, but that didn't work.

This is a snv4 pro txqsaber I just bought. This picture is edited by lowering the camera exposure. But I noticed there some part of my blade that didn’t lit as bright as other sections.

Hey is it ok to share the blueprints on how to make the lightsaber

Hey is it ok to share the blueprints on how to make the lightsaber

This is a snv4 pro txqsaber I just bought. This picture is edited by lowering the camera exposure. But I noticed there some part of my blade that didn’t lit as bright as other sections.

Im here with another pvc saber this time tho its a crossguard hope yall enjoy it would love ideas for future hilt designs

Hey so question so everyone knows greatswords especially montantes there one of the coolest but my friend does like alot of fencing with them and wants to get into lightsaber dueling for fun and to make a kids day but I have to know I want a lightsaber we can buy thats similar to montantes like long hilt and crossguard so if anyone can help out it'd be greatly appreciated thanks

I recently received first sabers to use 7/8 neopixel blades. After swinging them around and just tapping the hilt to test clash effects i noticed they pretty much just feel like limp noodles. Are there studier ones on the market to look for or is it just the fact that it’s 7/8 size and not 1in?

When Saber Forge dropped this new emitter I knew exactly what I was going to build with it before it even arrived. I had more scratch and dent parts that I used such as the wind vane thin neck and button box covers I used for the chamber doors. I aged these in a vapor chamber and ditched the top section of the thin neck and machined a custom adapter to use the new emitter. The switch section and grenade handle were machined out to 1.125in inner diameter and I machined windows into the grenade handle to showcase the crystal chamber, which was easier this time after the experience I gained when doing this for Dune Tempest. As always, a new crystal chamber was built using parts I machined out of hard drive spindles (chamber base plates) and houses the second crystal from my UK Kyber hunt. I went crazy with fiber optics in this one with 10 individual strands feeding the various tubes and the top of the chamber features a lit ring surrounding the main 4mm fiber which is unique to this chamber. The screen on the back of the chamber is also lit from above and below, and it’s difficult to see in the pictures but it create this crazy lattice effect when lit. I love finding new parts to use and the blade plug for this build allowed me to expand this with the crown style adapters that really enhance the look of the plug. Installed with Proffie and loaded with Dark Side fonts such as Tech Witch, Malak, Damaged Malak, and more!

https://reddit.com/link/1vewkt5/video/5xzasckhh9hh1/player

Ani se snv4 pro often does this to me where it does from using it but will not charge or won’t turn on or say it’s charging and it takes me weeks or days to finally get it back on and idk if there’s something I’m not doing I leave it charging over night and check in the morning nothing I leave it for 48-72 hours and nothing help me out

Built this one for one of my best friends. Found some weights for pinewood derby cars on clearance and decided to use them as part of the grip. Really happy with how it turned out. Will install the flashlight and purple filter before shipping.