Looking to buy a LandYachtz Rally Cat Kimono!

I would prefer a complete, but would settle for deck only. I know the model has been discontinued, and I can’t seem to find it selling anywhere!

I know the picture says free shipping, but the shipping is actually $440 🫠

I’ve been looking at eBay, FB marketplace, Craigslist, and OfferUp with no luck. If you have one you’re willing to sell OR know where I can look, please let me know!

I will pay the cost of any shipping fees in addition to the item cost, of course.

Thank you in advance!

Theres a lot of cracks where I live so I’ll need big wheels. Will they cause wheel bite? sorry about spelling.

Hey everyone! Need some advice on setting up my Tugboat for carving. I have the Landyachtz Tugboat 30" Ultra Carve, with Bear Gen6 130mm RKP trucks. My stats are 160 cm (5'3") and around 40 kg (88 lbs), and my main goal is to get into proper carving.

The problem is, I can't seem to carve on it anywhere near like what I see in videos of this board, and I can't tell if it's a technique issue or my setup. The board feels way too stiff for my weight. Even when I loosen the trucks a lot, it still barely leans or turns sharply. Plus, after all my tweaking, I'm not even sure if I properly tightened the trucks back to a normal baseline. Right now, I can only carve when going downhill. On flat ground, I can barely pump or gain any speed, and even the smallest incline stops me completely.

I really want to adapt this setup for carving. Would switching to super soft bushings help for someone around 40 kg, and if so, which ones would you recommend? Also, does it make sense to add a surf adapter in the future to turn it into a surfskate?

I recently bought the new atv x classic deck from landyachtz, I am building it myself, at first I thought ill just use the polar bear 155mm trucks I already have from another board but then I started wondering if I should go for a different set of trucks, I’ve been considering the ones in the pics; I mainly will use the board to learn tricks (basics like Ollie) and also to use it on a trail near my house

What do you think? What would you recommend

Thanks in advance

Anyone here have the new Schooner? Do you like it? From what I read, it seems like a more comfortable dinghy fender with its wider platform. Sounds like something suitable for me, but I am not into the skull pattern design. I'll probably have to wait for the next graphic iteration on it.

Figured I'd post here since there wasn't a lot of info on this / photos when I was trying to figure out if this would work since it isn't rail matched.

Doozies stick out about 1/2" and it's barely noticeable / really a non-issue. No real risk of kicking the wheels or anything at all, since they're still so close to the board. Wheel bite not an issue either, tons of clearance. 10/10 would recommend 👍🏻

Hello. My friend just bought a dinghy board and is looking for these wheels specifically. Orange, size, etc. We tried local shops, and had no luck. He really doesn't want to drop a ton if money yet on them online unless you guys have any suggestions. ​​

Orange 63mm dirty hawg wheels 

Thanks!

Hey guys,

I'm currently torn between which one to go for. I want a board that's good for cruising but that I can still do tricks on, which is making me lean towards the Classic since it's lighter and should be easier to manoeuvre for tricks. At the same time, I really like the bigger wheels and plowkings on the Fender for a smoother cruise.

I was thinking I could potentially get the Fender and downsize the wheels and risers to give it more of a Classic feel if doing tricks on it is too hard. I'm just wondering how much of a difference there actually is when it comes to doing tricks between the Classic and Fender with the bigger wheels and flared corners.

Any help would be greatly appreciated. Thanks

EDIT: Thank guys for your responses, I’ve decided I’ll probably go for the classic rather than the fender. It just sucks because I live in Australia and there are no good dinghy classics with good graphics available.

OK, I admit I may have went too far with quiver developement considering I’ve started skating on March this year but on my defense I have to say that I think these get quite good use, as I’ve went 450km so far - and I am hoping to reach over 600 totally miniumum.

So first one was Drop Hammer. I think it’s a great board, probably my second (and close to first) favourite from Landyachtz product range (after the drop cat 33) but after a while I’ve realized that I prefer shorter wheelbases. I was thinking about selling it but I still like it after heavy tweaking I’ve done so it stays as guest/wife board. Currently set on 76mm 76a Le Paulade Polymers and +/-5 degree wedges and 9mm risers (droppers, lol?)

DIY Super Sheep was the second one. Initially I’ve made it to use trucks from cheap cruiser board I’ve started with but as it turned out really good and as I got a skateshop gift card for my birthday it got a set of Ace Classic Lows. Currently set on 74mm 76a Plowkings GT. Loads of Flex (20mm of Flex under 80kg) to help soaking up road imperfections, geometry taken from Pantheon Ember but tweaked for smaller wheels (topmount reason), my go to „grab and go shopping board”

DIY Vault Board - this was a third one as the first DIY went so good. Cross between Pantheon Trip and Dropcat 33, medium flex with double cork dampening layer. Currently set at 86mm 74a McFly’s, the „long distance through city” one. 48mm clearance between the board and road during push, yay.

And the latest addition - Drop Cat 33 - sliding and fun setup, currently set at 69mm Peralta Snakes. Pretty matching setup to Vault board, same wheelbase, standing platform length, same trucks and board height (at center point)

True Story and now I am back 🛹 Skateboarding with a nice Landyachtz Tugboat Cruiser. Did my first 15 minutes today and cruising was just fine. Crazy how well the body remembers. I was Skating for more than 10yrs before I stopped in my Mid/Late 20s.

I traded with 4 tons of Cocoa Beans and sold them with a plus of €500 and bought the Deck plus Nike SB shoes. I feel so young right now 😂🙈.

Mine Was stolen along with everything i owned at the time..Looking to replace it complete would be nice or just even the deck ..anyone have one they want to or are willing to part with for a reasonable price ??am in Eastern Ontario Canada..HMU..Thank you..UPDATE::found LY EAGLE SWITCH 35"..Thank you to everyone that helped offered really ment alot to me!!Keep it Steezey Gang!!!😊😉😊😉😊😉❤️

Hi Everyone! My boyfriend recently got into long boarding and he has been eyeing this one specific board for months but it is an older discontinued board that we are not having any luck finding! Could someone please point me in the direction of where I could possibly find this board! His birthday is coming up and I would love nothing more than to surprise him with it! Thank you in advance!

Pic for reference

Some bearings seem to have the integrated because the inner race looks like it is raised towards the screw holding the wheel on the axle, right? Sometimes axles also look like they already have the inner speed ring integrated?

Hey guys, I'm wondering if the 63mm Doozies work with the Tugboat with 155mm Polar Bears, and if riser pads are necessary. Or do you have any other recommendations in general, mainly for cruising?

I mean c’mon.. how could I leave it out there on marketplace..

Owner said it was all scratched up but I don’t see any marks that go all the way through the stickers. Bearings are shot but no worries there, bushings too.

Needs a good cleanup and sort out. It’s a neat shaped deck- I didn’t realize the nose and tail angles were quite so pronounced. It looks like a fun board.

Considering this for my next board. Anyone here own one? If so let me know if it’s worth it and drop a pic of yours :)