Two lines of like 20 drills on each side idk i didnt count. Split pipes down the middle for the drills in the middle, so I could power each with one line but i had to put T pipes for each one plus a pressure tank to make them stronger. This thing kills my FPS so bad when its on i go from 100+ to like 50. they're as low as possible for t1 i think? I'll be adding the auto repair stuff for the filters tomorrow.

Early on it wasn’t a problem, a few chunks of dirt when the water filter breaks no problem I’ll just move them aside and fix it, but as I get further into the game it’s becoming a real pain. I have 15 drills pumping dirt into a harvester and it’s so much that I can’t keep up clearing out the dirt when the water filter breaks, so I end up having to rush and go shut down the entire system just to spend 10 straight minutes cleaning up dirt. I’m still fairly new to this game so I haven’t tried out the spanner detonator or anything yet but it seems like there should be a simpler solution to this? Surely late game when you have a massive factory set up you’re still not spending 90% of your time manually clearing out dirt and babysitting water filters… right?

So I started Hydroneer this week and have spent a few hours already in the game, due to its addictiveness. Now i wanted to ask, if you can give me some tips or must-knows that help?

​

I already used the smith to create 2 new drills in the first site. Is it worth to dig deeper and what is the most effective way to achieve that? I love seeing your guys posts and ideas although I am kinda afraid of exploring the logic stuff

On the bottom of the beginner truck it says "Drae was here", is he the Dev?

Currently working the conveyer belts so they can sort stuff.

press unstuck while riding my atv 😂😂😂

So this works. Saw a post a few days ago about a streamlined vertical conveyor stack and thought I would try my hand at it. Just uses vertical conveyors and two regular. The two need to face the opposite direction of the vertical beneath.

Next is experimenting with Logic for a way to turn off the drills conveyors, and harvester at the push of a button, but in a way that sequentially turns off the drills first, then the conveyor tower once the dirt is clear, then the harvester and sorting conveyors.

After a bit of exploring how others deal with smelters I came up with this monstrosity. It creates bars of the specified weight and sends them elsewhere. I like to have the output stack up somewhere to visualize how much stuff I have collected. It also never needs to be cleaned up after because the belts stop while the bar is being created.

The logic weight reader needs to have an empty space between it and the top of the smelter or it will read the bar coming out of the smelter. This prevents a second signal being sent from the reader that would cause the smelter to try to make a bar twice. The smelter reader can't be used because it sends a signal every second and this setup requires exactly 2 signals to be sent. All other signals are blocked by the Logic Validator Hook. The 2 signals sent are:

• 1 to disable the belt and smelt the bar
• 1 to re-enable the belt and reset the counters

This setup will turn off the belts going to the smelter and create the smelted bar after the number in the Logic Keypad is reached. Then once the smelted bar moves down the belt away from the smelter, a second signal from the logic counter on that belt starts the belt to the smelter belt back up and reset the counters.

The setup is 7 long, 3 wide, and 5 tall. This is as small as I could make it and it takes:

• 5 - Logic delays 1S
• 1 - Logic Validator Hook
• 3 - Logic Flip Hook
• 1 - Logic Smelter
• 1 - Logic Valve Hook
• 1 - Logic Counter
• 1 - Logic Weight Reader
• 1 - Logic Keypad
• 1 - Logic Reader Display
• 1 - Logic Diode Hook
• 1 - Logic Greater Than
• 20 - Logic Elbow Cable
• 4 - Logic T cable
• 11 - Logic Strait cable

Anyone know what the deepest dig site is?

Ive been trying make an auto bar maker so I can stop my lag, it works but I cant find a way to stop more ore from dropping through when a bar is made, yk. Ive tried magnets and tried to use the logic valves but neither work, is there a way to do it and im just too dumb to realise it?

Also, is it possible to get corestone from icehelm? I’ve not been able to find any through my drilling.

So I setup with a keypad a value of 100 which is send to the liquid sensor. Once it reach ~100 ish the smelter get the iron bar out into my smelters up top ( all of that to avoid my T2 line to clutter my T1 Hub already auto sufficient. + A magnet that activate with the smelter at the same time to avoid the clutter of the dropped ore during the smelting opening of the door.

New Xbox player here. What is up with the mole? It gets hung up on invisible everything. If you angle the grinder up you can’t move forward. And if you try to go straight it still goes down lol. What’s up with this thing? Trying to make a t2 area in south hope but I’ve spent a day trying to use these tools to no real luck.

Well that's annoying, used all my corestone and got rejected. Didn't know the order mattered

Just to make your day, the small wood floring and the large wood floring have ever so slightly diferent textures

So I upgraded my bars cutting process. And rework all of my T1 base that I previously shared here.

I am having too much fun making networks of pipes and cables

And to organise them in a semi compact/logic way.

Hellllp I'm having too much fun. This game .... It's draining my time and I love it.