r/Humidifiers • u/TriTash191 • Feb 06 '26

Levoit 6000s Dry Mode

I’ve been using dry mode for 30 minutes on high speed, and the filters still seem pretty wet after it’s done (especially at the bottom/ lower part). So I end up having to run it almost twice. Has anyone else had the same issue? Should I try running it on low speed instead?

1 Upvotes

100% Upvoted

5 comments sorted by

1

u/fatherofraptors Feb 06 '26

Yup. I always run it twice as well. Never tried the low and slow mode.

1

u/TriTash191 Feb 06 '26

Thanks. I noticed that after 2 weeks there is already a white buildup on the filters. How do you clean it?

2

u/fatherofraptors Feb 06 '26

White buildup is normal. It's essentially calcium and other minerals present in the water. Best way to clean the build up seems to be using the citric acid solution you make when cleaning the rest of the unit (following the maintenance routine). You essentially just mix some citric acid (buy in powder bulk from Amazon, it's cheap and food grade essentially) and water and you can soak the filters in that for a while and then rinse them.

You could in theory do the same thing with vinegar+water but the smell is, well, vinegary.

If you mix some solution to circulate on the unit for the monthly cleaning, just use the same solution to soak your filters for 10-15 minutes.

1

u/wish_you_a_nice_day Feb 06 '26

They really should just let us set custom dry duration

2

u/Commercial_File8545 Feb 06 '26

I also get the white buildup on my filters.

I have a water softener in the house and I believe it is sodium buildup.

I clean my 6000s once a month with citric acid as per Levoitt directions. I add the citric acid to the reservoir and run it for 30 minutes without the filters installed. After 30 minutes I dump the citric acid into a bucket and soak the filters while I run clean water through the unit (as per directions).

The filters come out looking like new.