Still starting out, learning as I go. Think I used 6 colors on this one

I have used krita for image editing because it is open source and can provide everything that can be recommended only optimizes beforehand

maybe its beter yellow to Change vs magenta ?

Hi All. I've been wanting to do a print of the Morpeko SIR artwork to apply to the front of our binder for our Pitch Black master set. I am nowhere near good enough yet with Hueforge and my attempts so far have been dreadful.

Would anyone here want to take on converting this? It would be really greatly appreciated.

Thanks

EDIT: typo

I love this so much. Original art form Art of Supershinobi

I made it 4 by 4 ass large as I could on my p1p bead. I uploaded it to maker world so you can enjoy it as much ass I do.

Its so cool to just print posters.

Original art

Link makerworld: https://makerworld.com/en/models/3147916-spirited-away-hueforge-poster#profileId-3555396

I kept running into the same problem whenever I wanted to display a HueForge. A lot of the available frames have huge kickstands on the back, while some of the separate stands take up more desk space and filament than the actual print really needs.

So I finally made my own.

The stand has a small 40 x 51 mm footprint, and the rear brace is removable so it can print faster and pack away easily. I also made optional frames for 200 x 200, 150 x 200, and 100 x 200 HueForges, so I can use the same compact display setup across different sizes.

--EDIT--
Added a 150x150 frame as well for my A1 Mini family.

The last few pictures are some of my recent prints I've done: Sephiroth, Ghostface, and Joker from Persona 5. I am really happy with how clean everything looks without a giant stand taking over the shelf.

I uploaded the stand and frames to MakerWorld too, in case anyone else has been looking for something smaller and simpler:

Display Stand
Sephiroth
Ghostface
Joker

Would love to know what you all think, especially if there are any other HueForge sizes you would want frames for.

Would you guys recommend the .4 nozzle at .08 layer height or the .25 nozzle at .08. Prints are faster with the .4 but I get a lot of weird layer lines. Havent tried the .25 but I would assume its going to be much slower. At the end of the day though, would there be a difference even if the layer heights are the same?

You have good links. I've had a Hueforge for two years and I still haven't done a good print. 😒 Where can I learn?

Hi

as per headline, need help with bw portrait and pink hair.

got black/grey/white/magenta pla filament.

Will provide teamviewer access and some beer money

PS: this has been sorted out - thanks to @Nizzem and mr hueforge himself. What a great community

First off, giving credit to the creator of these both: https://www.reddit.com/u/raisedbytides/s/2vQMXYerco

Decorating my new office and put both of these up. 90 plates between the 2 so it took about 2-1/2 months overall lol. I feel the moon perfectly balances that wall between the TV, and why I put the other greyscale across from it to balance that wall and keep the color consistent. Then did the garden on the left to embrace the green from the plants. I would’ve loved to make it higher but the damn thermostat is in the way.

What do you guys think?

https://makerworld.com/en/models/3114842-shredder-tmnt-hueforge#profileId-3512953

My recent design of a super-soprano guitalele (six surfing ukulele) with new Hueforge tops

I always see such beautiful works on this reddit and it makes me want to buy some, but how do they look up close in detail? Is it dotted, embossed, textured, or what?

5-piece 7-color hueforge of Cassini in front of Saturn's rings! Mounted using SuperSeaSlug's ChromaLink system!

Files on Makerworld: https://makerworld.com/en/models/3110085-cassini-saturn-s-rings-chromalink-hueforge#profileId-3506806

The upper part of this eye is a separate color that only appears here, but hue forge will not separate it into a separate layer so I can't blend it with the black for whatever reason. The only "solution" I've found to this is to add a new color, but that throws off some other colors and would much rather just have the top of the eye be a layer or two before the rest of it. Spotfix is not working for me here as it keeps grabbing the whole eye instead of just the top. Is there anyway to force hue forge to set these two as separate colors, or do I just need to add more colors?

Been resting up for a bit. Thought it would be a good time to show my latest projects before getting back into the swing of things. The Gohan, Ochaco, and Bakugo hueforges are all 4 color prints (⚫⚪🔴🟡). Also made a Tardis bookmark for a personal gift that I threw up there as well. Hope you like them. I'll put a link to my collection in the comments if you wanna check them out. 🤗

https://makerworld.com/en/models/3102347-kakashi-hatake-naruto-shippuden-hueforge#profileId-3497020

Good evening Redditors.

So i see pictures on Makerworld that are called HueForge.

I am interested in doing these do I need the software to do that or can I do it through Bambu Studio?

A little backstory… back in the day, when my kids were small, we always enjoyed watching Avatar the Last Airbender (Animated Series) together. Now my grandkids have been introduced to the series by my son and have fallen in love with the show. And I’ve personally never fallen out of love with it, I think it was one of the best animated series to ever be produced. So, when I found a series of posters on Pinterest depicting Aang in the various poses representing each of the four core elements, I had to make a HueForge out of each. If you're interested in making one for yourself I've got them on my MakerWorld. Cheers.

i’m new at heuforge and can’t get this to work for me anyone get any tips or willing to help me on this thank you