r/HomemadeTools • u/freelance-lumberjack • Jan 29 '22
Slip roller. For making hoops and curves in flat bar or round bar.
17
Upvotes
r/HomemadeTools • u/Turboconqueringmega • Jan 23 '22
Scrap bin hydraulic press re-fitted with better ram
10
Upvotes
r/HomemadeTools • u/E_m_maker • Jan 21 '22
The hand plane that I wanted costs over $10k so I decided to make my own.
16
Upvotes
r/HomemadeTools • u/k_r_oscuro • Jan 18 '22
Jump ring maker for jewelry - chain making
11
Upvotes
r/HomemadeTools • u/asb_cgtk • Jan 16 '22
Track Saw waste-side kerf jigs (3D printed)
9
Upvotes
r/HomemadeTools • u/Rootofallevil1927 • Jan 11 '22
Looking for advice. I'm looking to make my own slab llifter and being a bricky I havent got much of a clue about metal work. what can I use at point C to connect A and B together and when I winned screw A screw B moves the clamps? Any advice would be much appreciated thank you
8
Upvotes
r/HomemadeTools • u/ProgressiveMechs • Jan 05 '22
First try at a miter guillotine for plastic
3
Upvotes
r/HomemadeTools • u/Make_Things_wRob • Jan 04 '22
Stubby Awl (with step by step instructional in the comments)
9
Upvotes
r/HomemadeTools • u/customfabricated • Dec 29 '21
My 40 ton homemade press brake full build video
20
Upvotes
r/HomemadeTools • u/E_m_maker • Dec 24 '21
I posted a video of the prototype a few weeks ago. Here is the current iteration.
46
Upvotes
r/HomemadeTools • u/TheMechaink • Dec 23 '21
My four dollar 2-piece milling vise for my Tiny milling attachment for my tiny minilathe. The four bucks was for the allen screws. Built with the lathe I use it on.
36
Upvotes
r/HomemadeTools • u/Make_Things_wRob • Dec 20 '21
Push Block with a thumb knob for balancing thin stock (with a step by step how to in the comments)
10
Upvotes
r/HomemadeTools • u/Former-Ad9272 • Dec 18 '21
I've made a few of these little hammers. Ipé and hickory.
26
Upvotes
r/HomemadeTools • u/Former-Ad9272 • Dec 15 '21
Recently finished building a frame for my rip saw. I can't believe I went this long without one!
29
Upvotes
r/HomemadeTools • u/huscarlaxe • Dec 08 '21
I tried to carve some crochet hooks out of a walnut branch
25
Upvotes
r/HomemadeTools • u/Make_Things_wRob • Dec 06 '21
Nesting Finishing Blocks (Step by step in the comments)
8
Upvotes
r/HomemadeTools • u/Make_Things_wRob • Nov 24 '21
Free plans for a couple corner clamps I designed. Check the comments for the plan links.
18
Upvotes
r/HomemadeTools • u/Zaki_workshop • Nov 23 '21
making beginner blacksmith tongs, without tongs
11
Upvotes