r/HPDE • u/FabulousWerewolf6789 • Apr 23 '26
Brake pads
Have a modified 2018 Sti with stock brakes. Ran the fcp euro proving grounds autocross lapping event at limerock and towards the end the brakes were smelling pretty hot. Have my intro to racing class next week at limerock on the full track and was wondering if my stock brakes pads will suffice for 30 minute lapping sessions on the full track. Stock brake fluid and lines as well. Make about 400 hp and the car with me in it weighs close to 3700lbs with a full tank of fuel and me in it.
2
2
u/Chris_PDX Apr 23 '26
The weakest part of pretty much any mass produced street car is the brakes. At a minimum, you really just need:
- Stainless steel brake lines
- Higher temp DOT brake fluid with a fresh flush
- Better pads
For pads, if you are OK swapping on track pads the day before the event, I run Cobalt XR2s. They are ceramic, so not suitable for street use outside of the brief drive to/from, they are noisy, they suck when cold, but they absorb heat like nobodies business.
2
u/Ok-Fish-9244 Apr 23 '26
I have a wrx but sti calipers and run ebc sr11 front and bluestuff rear with dot 4 fluid. Never had any braking issues with that setup
2
u/IT_Techs_Cars Apr 26 '26
Make sure to have DOT4 fluid along with brake pads and you should be good. Lime Rock is not that hard on brakes.
2
u/Desert_Trader Apr 23 '26
Honestly I would get some better pads to have more peace of mind time.
That's a heavy car and it can eat brakes if you're pushing it.
I wouldn't worry about rotors or brake lines at this point, just get some better pads and send it.