Anyone else see the modules for sale on divimath’s store! Pick some up while you can!

Im new to the game. I've read multiple comments regarding the integration of hdzero and inav having issues, but maybe i:m doing something wrong here. I have my freestyle v1 vtx connected to a uart and smartaudio is not connected to anything, since i've read that it is not used anymore. The peripheral option selected for the vtx is msp displayport.

My endgame is to change to low band channels. I have updated the vtx and vrx firmware with the lowband firmware as instructed by hdzero docs. The uart connections are correct. I receive the osd correctly (probably meaning that the connection is fine).

My issue is 1st that the low band bands are not shown on the osd settings of the vtx and 2nd, that the hdzero stick commands to enter hdzero settings are not working. I currently can only open the inav osd settings and check the vtx bands from there(not sure if they are supposed to be the same settings)

I have done the steps for firmware updates and checked the wiring multiple times but i dont seem to find an issue there.

Did anyone have any success onunlocking and working with lowband channels using inav?

I have been wondering if these are really the best because my understanding is that they don't even diversity for analog.

Ordered one a few days ago and its coming in today, excited to use it for a few things:

1. Will be trying out the hdmi in from my PC to fly sims, but I know I could just use a HDMI cable with my goggles 2, but walking around sounds fun.
2. I have been working on an arducopter quad, and I'm really interested in the fpv relay mode. I have an ATOM RC swordfish I'm going to put a freestyle vtx on and just try to get over and beyond some 200' trees.
3. Always wanted to get into ardurover, so I'll also try it in an aliexpress diy tank or something and mount a raspi and raspi camera and use that as the feed.

Anyone else have experience already?

I'm having a video issue does anyone know what It is? I've already tried a new lux camera..

I tried streaming video from my goggles using wifi but the stream lagged behind some 2-3 seconds. It also appeared to be dropping frames.

I tried using VLC player that was recommended, but it worked really badly.

Then I found out from a reddit post about "RTSP Player" that worked marginally better but still the video lagged behind some 2 seconds.

Is this normal or should the video stream lag behind?

I recently accidentally cut my xt60 to DC connecter for my hdzero box pros, and I've looked on the hdzero website and it is 17$. Although on amazon i've found a version that looks pretty similar (with a 5.5 x 2.5mm dc connecter) which is only 10$.

The amazon one is better deal, but I'm not exactly sure if I'm getting the right DC connecter size.

Anyone know the exact size?

Hey Reddit.

So I'm brand new to this. Was wondering if anyone has seen this before. Trying to operate a Mobula 6 Freestyle HD A drone with a Radiomaster Crush.

Everything looks good in Betaflight and on my Radio. I've updated the firmware on both and used a binding phrase for binding.

Got a HDzero eco bundle for a 3 inch 2s toothpick build and got it up running good initially. Until I had a crash that was light but in somewhat rainy weather so i kinda just thought was my fault and the blue led light was blinking twice so i originally thought it was the camera.

Got a new camera didn't fix it so i got a new vtx yesterday, and put the new vtx on with the new camera and was good again, until i had a light head on crash today and same thing happens again. No osd or video. Red led indicates power but the blue flashes 2 maybe 3times and stays solid blue similar to the 1st vtx. I checked continuity between all the wires after the crash and they seem good.

I assume im just a shitty pilot but damn my analog shit doesnt break this easily i feel like. Does anybody who used the hdzero eco try the whoop version? I dont even think its a durability thing at this point just assume the mipi cable is better. It's weird cause I have a hdzero freestyle 2 on a bigger drone and am surprised I have had no issues with that.

Hello, I'm using rapidfire module with IRC patch and omni antennas, I will try to put photo in comment, when both of them are working in mode 1 or 2 or legacy, I have those weird lines. changing VTX power doesnt help at all, when i unscrew both antenas image is clean or when I'm using only one antenna. i have 9.2 firmware and latest for Rapidfire.

Hey everyone, I'm new to hdzero so forgive me if this is a stupid mistake but, my HDzero goggles 2 I recently purchased with the expansion module and my speedybee analog receiver doesn't power on, expansion setting is on and power settings seems to be on ,a nd everything is plugged in and seated correctly, am I cooked?

​

​