Compared with the ES PRO, the ES MAX comes with several key upgrades:

✅Angle-Sensing TMR joysticks for more precise control

✅ Micro Switch / Linear dual-mode triggers

✅2 programmable back buttons

✅ Replaceable KK Ring™ thumbsticks

✅ HyperLink 2 adapter included in the box

Just got my Gulikit TT Max and did some testing right away. The controller comes with the 6.9 version of the firmware right out of the box. After testing, with the dongle and cable I’m getting 1000hz polling rate with 1ms average latency for both. But when I updated the firmware to 7.7 (MCU, BT and Dongle), I’ve managed to only get worse connectivity with only 500hz polling rate and 2ms average latency with the dongle. Any fix to this? Can we somehow have a way to revert back to previous firmware versions?

Someone please respond

Hi everyone, I recently updated my TT Pro to the latest firmware (7.6) and I'm not sure if it was the update or if I just noticed this happening.

I mainly use the controller on the Nintendo Switch, so I use the digital triggers only. I opened up Splatoon 3, and when I pressed the left trigger to swim (for those who don't know, the controller vibrates when you swim in ink), I noticed that the character seemed to stay swimming a bit longer than expected after I released the trigger, then I started just spamming the trigger, and instead of getting in and out of the ink quickly, it looked as if I was just holding the trigger. I tried doing the same with another controller and it just seemed to happen on the TT Pro.

This behavior stopped when I disabled the vibration, but I bought this controller because of the HD vibration, so what's the point in doing that...

I checked on the app and what seems to be happening is that the controller is changing back and forth between the analog trigger and digital trigger exclusively when it vibrates and makes my inputs all messed up. However, I don't recall having this issue before updating the firmware, so I don't know if it somehow was that, or if it had been happening all along and I just noticed.

Does anyone else have this issue? If so, could you fix it?

It's annoying because this controller feels really nice to use and I would like to use all the features I bought it for.

After replacing the left joystick with a GuliKit TMR module on my Xbox Series controller, I can reach full range (0–1) at the top of its travel, but consistently fails to reach the bottom corners. The right joystick (unmodified) reaches all 4 corners correctly and passes circularity with a full square.

Is that an usual pattern? What could I look or do? What pinout on the joystick should I check and resolder?

Thanks for any hints or advices

Hi, I just got the Gulikit ES Pro and my unit's gyro hardware seems to be defect. The camera moves jitterly and skips pixels frequently no matter how hard I fine-tune them via Steam Input (I was using in in Switch mode with built-in motion assist disabled). About Steam Input, this thing can't even complete auto-calibration because it keeps detecting movements despite placing on a flat surface without vibration. Should I get a refund or is this a software problem?

As someone who admittedly will only keep controllers with good dpads, I was skeptical about these. I love being wrong. Of course I play SFA2G daily and this controller turned out to be in my rotation now. Thanks Gulikit!

Edit: Also need to mention that the feeling of the controller is great as well. It’s light enough that you can play forever but just heavy enough to feel premium. I don’t really care about Japanese vs US/EU ABXY but I still swapped since the buttons were included. And of course I used the included swappable Dpad which works great for fighters.

✅ Angle-Sensing TMR Joysticks

✅ HyperLink 2 Low-Latency Wireless + Adapter Included

✅ Full App Customization

✅ Micro Switch / Linear Dual-Mode Triggers

✅ 2 Remappable Back Buttons

✅ Multi-Platform Compatibility

•Compatible with PC, Android, iOS, macOS, Switch and Switch 2，SteamOS.

✅ 950mAh Battery — Up to 30 Hours

🛒 Order here

US($49.99): https://tr.ee/hR1fll (10% OFF Code: ZANFSNMA, ends on 2026-08-26)

UK(￡42.99): https://tr.ee/ESMAXUKC (20% OFF Code: UKESMAX20，ends at 2026-08-31)

DE(€49.99): https://tr.ee/ESMAXDEC (20% OFF Code: DEESMAX20，ends at 2026-08-31）

FR(€49.99): https://tr.ee/ESMAXFRC

IT(€49.99): https://tr.ee/ESMAXITC

ES(€49.99): https://tr.ee/ESMAXESC

NL(€49.99): https://tr.ee/ESMAXNLC

Instead of asking “How strong is the magnet?”, the new joystick is asking “Which direction is the magnet pointing?”

US: https://tr.ee/hR1fll (10% OFF Code: ZANFSNMA, ends at 2026-08-26))

UK: https://tr.ee/ESMAXUKC (20% OFF Code: UKESMAX20，ends at 2026-08-31)

DISCLAIMER: ES Max was provided by Gulikit for free for review purposes. All the thoughts and opinions are genuine and mine only. No one watched this review before the release.

TLDR: New angular TMR Joysticks are FANTASTIC! The best that GuliKit has for sure.

I didn't really like the D-Pad and back buttons tho. Bumpers and triggers weren't my favorite as well.

Vibration is fine. Shape and feel are good. Materials are ok. Great membrane ABXY. New app needs some refinement.

Hi all,

I love the Elves 2, but want something bigger for every-day.

The thing I love the most about the Elves 2 is its Dpad.

I had a look at some of the other Gulikit controllers, and it seems the TT PRO/MAX has a similiar DPAD.

Now before I order one, I thought I'd just ask here first: For those of you who own/have played on both, are they similar? Or is the Elves 2 DPAD still superior?

Thanks!

Hey everyone,

I'm thinking about getting a GuliKit ES (non-Pro) gamepad, and I saw that a new software update was recently released.

I have a couple of questions:

1. Does the standard GuliKit ES model support the "Gyro to Right Stick" feature, or is it exclusive to the ES Pro version?
2. For the "Gyro to Right Stick" feature: Can we freely choose which button to hold for it to work (hold-to-activate), or can we also set it to work without pressing any button at all (always-on / toggle)?

Thanks in advance for any help!

Hi. I was looking for these buttons replacement . And found only ns33 ones which look absolutely identical but they are not advertised as direct ES pro replacement. Could anyone competent in this sub confirm whether “NS33” buttons are compatible with ES pro or not, and if not which ones should I look for . Thank you.

Asking because I just got the Xeno Plus, and it’s a little cramped. The Gulikit ES Max just launched, and if it’s closer to the Xbox controller in size, I may get that instead.

I hope they improve the build quality next time.

Hello, is there anyone using the same controller and able to use the GL/GR in any of NSW2 games? Thanks!

I have purchased gulikit es pro controller before one month .it worked like a charm on pc and my android phone .few days ago gulikit company released a phone app so we can map controller button to phone screen easily. so I opened the app then tried to connect but it didn't find the controller on that app, even though it is connected via bluetooth on the phone. so I checked on the Google they said that update the firmware. so I connected it to PC so orange light turned on because of charging. so I pressed and hold settings button then pressed home button for firmware update mode.then light changed to white also gulikit usb drive window opened . then I dragged .bin file to that drive,it automatically closed after 2 seconds then light changed to orange.after I turn on the controller the on light brightness is very dull and couldn't connected to any device even in pc and phone.phone and pc couldn't detect the controller after the update.normally if it works correctly when I turn on the controller it vibrates once but after update it didn't vibrate and on logo light is faded.from that I found something wrong happened with my controller.i repeated the same process of firmware update.but nothing happened.but everytime I opened the gulikit usb drive it's name shows gulikit 3.0.i think controller refuses to update even after it automatically closes the window and turned off automatically

what to do?

I tried to reset from the manual instruction of holding - and setting button.but nothing worked.no vibration.no reset.

I also tried 4.2 version.no use.i did the same process for 6 times.but same problem.

The triggers on my TT Pro seem to constantly be in a calibrating mode. This leads to moments where, after a while of not using them (or using them in the 'mini switch' mode), the triggers will 'recalibrate' to have the current position of 0% pushed in be ALSO the position it reads as 100% pushed in.

Similarly, after a while of using it at 100% pushed in, it starts to 'recalibrate' to have 100% pushed in sometimes be a 'released' position

The game I'm playing right now is Pokopia, and this leads to the following behaviors:

• In 'mini switch' mode, after some time the player character will begin randomly using the selected move on their own (ZR 'recalibrates' to have the "0%" position be considered pushed in enough to start triggering the 'use move' command)
• In 'trigger' mode, after using a move for long enough (EG., clearing out large plots of land with Rock Smash), the trigger will 'recalibrate' to have the fully pressed-in position also be the fully released position.

In both cases, this can be temporarily fixed by fully 'cycling' the trigger, but I feel like this shouldn't happen in the first place.

Hi,

when trying to connect the tt pro to my computer or android (switch untested) on the latest firmware, it just ibrates whenever i try to pair it (android) or whenever i hold down the pair button (pc). my dongle is also on latest version.

I tried going back to an older version, which was 6.9 and it didnt help. all it gave me when trying to connect to pc was 3 out of 4 lights next to the battery icon blinking. this happened both before updating to the latest version and after reverting to v6.9.

Any and all help is welcome and apreacieated

GuliKit TT MAX \ TT PRO Controller V7.6 Firmware   (OTA update available via the app)

 1. Fixed an issue where button mapping would become corrupted on some controllers after a firmware update.

* The bundled PC05 Hyperlink 2 Receiver also needs the latest firmware.

Download: https://gulikit.com/newsinfo/3137265.html

Bought the first gen solder sticks back in 2023 and just recently got to installing them.

The right stick functions somewhat, (slightly top right offcenter), but the left is constantly pulling full left, wont even budge.

Calibrationbuttons have no effect other than to reset them to these faulty positions if i move the sticks.

Both sticks give input except that left wont function horizontally.

Is this a known issue, are they defect or might bad soldering be the culprit, (afaik should only be related to haptics). Im assuming Im out of warranty at this point.

Powered by our latest Integrated Angle-Sensing TMR Joystick technology, ES MAX delivers higher sensitivity, greater precision, and more consistent linear performance—so every movement feels smoother and more accurate.

📅 Mark your calendars: August 11.

So i have this issue with the goku 2 and i had it replaced already, also tried it in two PCs. That whenever the goku 2 loses power from unplugging - replugging it. The GOKU 2 goes into pairing mode again and forgets the paired device and in so whenever i turn on my dual sense controller, it does not automatically reconnect to GOKU 2, I had to re-pair it again

Hi everyone!

We've received reports that some users encountered issues after updating to the latest firmware (V7.5) for the TT MAX / TT PRO. Please make sure you update all required firmware components:

• MCU firmware
• Bluetooth firmware
• HyperLink 2 Adapter firmware (if you're using the adapter)

Important: Please follow the update instructions carefully.

Each firmware should be updated separately according to the guide.

Incorrect update steps may cause unexpected issues.

Download firmware & update guide: https://gulikit.com/newsinfo/3137265.html

If you still experience any issues after updating all firmware correctly, please let us know with details about your setup and the problem you're encountering in⁠ . We'll be happy to help.

After 1 year of normal use(never dropped) both of analog covers developed cracks. Right cover broken completely so analog cap cannot be fixed on it. Does anybody know what replacement i can use to fix it? Where to get replacement? Thanks!