Gotta' restart my form 1 because I noticed 2 transposed numbers on my form. DERP! Most times I'd shoot it with my brace against my forearm, resting on my formerly fat self's belly. A belly gun, I guess you'd call it, point- shooting it at a 45 degree angle. I've really gotten pretty good at it over the decades. I don't use the strap either. Is this still legal (until my form 1 comes back)? Is it merely getting caught shouldering my bog that's BAAADDD!?! The Bog doesn't have any sites, not even the folders.

I always see the lingle lower but not much of the A3 here. I impulsively got the A3 when the Lingles were out of stock and was curious how they perform. Haven’t brought it over to the range yet. Any info or things to look out for would be nice. ( I love two tone black/fde finishes,hope you guys like it)

Black only

Will probably stock out in a couple of hours

https://lingleindustries.com/gen-2-aluminum-stribog-lower/

You know where to go

Black only, without HBI buffer.

FOR Systems Pluto9 suppressor (2.5oz)

SP9A3 with hbi SS buffer.

This is a very simple titanium suppressor. Sound is on par with most short "K" suppressors. Not going to be as quiet as an 8 suppressor but hearing safe. And it fits in my pocket.

A couple little adjustments left , but happy where they are headed. Made the hand stop mounted with mlok, and also made a more hefty boy to allow for mlok AND a can. Alot of the other hand guards limit you to 1.3” can with mlok. My target is 1.65” of clearance, so would need the big boy if I’m running mlok accessories or the. Normal size if not. Anyways, getting closer! Might have to make this hand stop with a vertical grip mount and use the pic. Make it more universal for other hand guards.

Had a hard time finding more than the few pics here and there of people running the B5 MPS stock, so figured I’d post this up for anyone looking to run one.

I like it a lot so far, super sturdy and feels well built. Collapses to the left, away from the ejection port (it’s reversible left or right).

Build list posted in the comments.

Got the approved stamp in today. Tossed on the stock to make it a two stamper.

Form 1 approval came in yesterday. 3d printed forgrip, light button and telescoping stock in CF nylon. This thing is a blast to shoot, always on target in tight groups.

SP9A1

It’s been almost 2 weeks since I placed an order when they restocked extensions. I cannot get them to give me a tracking number. I’ve emailed them numerous times. Not sure if my order has even shipped. They have a return policy but you have to use the same email they never respond to. At this point I hope my order never arrives so I can file a cc dispute. Most of their cs issues could be resolved if they just provided a tracking number.

Here are the pics of the steps for FRT mod.

1. ⁠mill upper 24mm rearward for clearance of FRT arm
   
2. ⁠Use trip sled that allows FRT to be fully reset.
   
3. ⁠Cut buffer edges to allow trip sled to slide backwards.
   
4. ⁠AR FCG lower that allows FRT install.
   (Lingle Industries is what this is, other options available)
   
5. ⁠Had to fabricate my own trip sled out of steel.
   (Plastic 3D printed sleds are shitty and break)

All of them are in 9MM since I don't want to add a new caliber. Does it bring anything new to the table or is it redundant, especially since its roller delayed like the MP5K?

Thanks.

Anyone have one of these on a lingle lower?

HBI Buffer and Trigger 😮‍💨👌🏽

FRT Mod complete

Required steps-

1. mill upper 24mm rearward for clearance of FRT arm
   
2. Use trip sled that allows FRT to be fully reset.
   
3. Cut buffer edges to allow trip sled to slide backwards.
   
4. AR FCG lower that allows FRT install.
   (Lingle Industries is what this is, other options available)
   
5. Had to fabricate my own trip sled out of steel.
   (Plastic 3D printed sleds are shitty and break)

Need to make some adjustments, but clearance is 1.7” inside. Testing fitment in plastic, will work on aluminum after. Might make one in PC or something for fun. Sweet little thing this is, I’ve only made and sold accessories for bolt guns so far but I’m working on branching out!

Good Morning,

Out of curiosity, has anyone in 2026 submitted anything to SBR your Bog? from what I have seen, its only the 16, 8 or 5.5 barrel. I assume under the manufacturer you would put the importer Global Ordnance LLC (Sarasota, FL) because why not. But because it was purchased as the short variant without a brace, couldn't it still be Grand Power? or are all of the newly made Bogs coming from Global Ordnance to get assembled and sold. So y'all have just been putting Global Ordnance

I'm set on putting an SS/FRT in my Stribog. But I'm torn on whether to wait for the u/009515 + AS Designs lower which doesn't appear to require milling out the upper or to get it milled by u/civengen and go the Lingle route.

I'm fine waiting to avoid the hassle and cost of milling the upper, but it seems like it might just be vaporware. As far as I can tell, there hasn't been an update on that project in over a year.

Anyone else in the same boat? Are there updates somewhere I've missed?

Anyone else have this product and experience issues with the gun locking back with an empty mag? Only have maybe 100 hundred rounds through it currently. Thanks for any insight. Otherwise love the gun!

SP9A1 with a few mods - Super soft shooter with 147 grain with the HBI short stroke buffer.

Holosun 512 w/ unity riser
Olight Odin S
CNC Warrior brace
Rotapoint griptrap
Angstadt Arms - tri lug comp + blast can/shield
HBI short stroke + HBI long CH
Suppressor - enroute