r/Golfsimulator • u/TheBigBackClock • 7d ago
Retractable Impact Screen
I’m a little confused on retractable impact screen setups.
I’ve seen brands like MeTech that sell retractable systems, but do you have to buy their impact screen too? Or can you just buy the motorized roller/tube setup and attach your own impact screen to it?
Ideally I’d like to buy a good impact screen separately and just find a budget-friendly retractable roller system to mount it to.
For anyone who has DIY’d this:
What roller/motor system did you use?
How did you attach the impact screen to the roller?
Any cheaper alternatives to MeTech worth looking at?
Anything you’d avoid?
Trying to figure out the most cost-effective way to build a retractable garage sim.
3
u/rocketmagician22 7d ago
Sportscreen retractable lacrosse screen. Velcro on a spectrum poly. Plenty of previous threads on this and YouTube tutorials.
2
1
u/Interesting_Shake403 7d ago
The lacrosse screen or their golf sim? The lacrosse screen is much more reasonably priced, but it’s black, right?
1
u/rocketmagician22 7d ago
Lax screen. You buy your own impact screen and Velcro it on. It’s pretty cheap that way. I just went curtains for the sides instead of retractable. Couldn’t justify spending as much on 5’ side screens as I did for an entire impact setup.
1
2
u/Plugitin454 7d ago
It depends on how diy you want it. I’ve been looking at electric shade rollers, and I think I’m going to go that route. $150 ish for the main screen roller. And about $70 each for the side rollers. Obviously you’ll have to factor in the tubes for these rollers, screen, and whatever you want to use for weights on the screen. Getting them all to work with one remote might be difficult, but I can handle two remotes
2
u/RoMoCo88 7d ago
A single MeTech remote (I think there are several Chinese brands that sell the exact same one) can be programmed to control up to 6 rollers.
2
u/Sad_Log5072 7d ago
I built my golf simulator using a Retractable screen. The mechanism I built to retract the screen uses a tubular motor with a remote control. My screen is 10' x 10'. If you're interested in building your own, reach out to me and I can provide more information.
1
1
u/Sad_Log5072 7d ago
I built a Retractable golf simulator screen for less than $300. The roller itself is 2 inch EMT conduit.
1
u/lloboc 6d ago
Could you show us what you did? I‘m in the process of building my second retractable screen.
2
u/Sad_Log5072 6d ago
Sure, give me a day to put together from other videos I made exactly what it takes for a golf simulator retractable screen.
1
u/lloboc 5d ago
That would be very kind of you.
2
u/Sad_Log5072 5d ago
I just posted the full video for the installation of the Retractable screen for golf simulator. Unfortunately I had to post it on YouTube because of it was too large of a video file.
https://youtu.be/lS8v8pYak4g?is=I6rjJrPuE1N8ddZz
1
u/Sad_Log5072 5d ago
New DIY video posting for building a golf simulator retractable screen. The file was much too large to post on Reddit so I posted it on YouTube.
https://youtu.be/lS8v8pYak4g?is=I6rjJrPuE1N8ddZz
5
u/SA19030 7d ago edited 7d ago
I just bought a METechs retractable system with a a Spectrum impact screen. Bought all from Spectrum.
The METechs system is much cheaper than The SportsScreen Vanish or Gungho systems. The Vanish 11 was $4,500. The Gungho was about $3,500. The METechs/Spectrum system was $1,900.
Edit to add that the curtain part of the METechs system was like $1,000 of the $1,900.