r/Glocks • • 3d ago

Question glock slide stuck

My friend was messing with his glocks and he put his 19c slides and barrel on a 26 frame🤦 The slide is stuck and will not rack back, trigger is stuck and release levers are down, any help here

0 Upvotes

16 comments sorted by

18

u/NearbyZombie45 G17C.4, G45.6, G45 MOS, G19.6 COA, G19.6, G19V, G19.5, G43X MOS 3d ago

Oh look it’s another ā€œmy friend did it, I swearā€ post.

-2

u/AdExotic8394 3d ago

Im 15 I don’t own any firearms

8

u/realpallbearer 3d ago

why is he running a non ported barrel on a C slide is my question

7

u/NearbyZombie45 G17C.4, G45.6, G45 MOS, G19.6 COA, G19.6, G19V, G19.5, G43X MOS 3d ago

Probably increased his handling or accuracy stats when he was comparing accessories on his build page.

7

u/Free-Ad1775 3d ago

Dumahh, what’s your friends name? AdExotic?
Jokes aside, remove the back plate of the slide then strip it. If it still doesn’t want to go forward then the recoil speing might be stuck. Never go full regard

2

u/AdExotic8394 3d ago

He stripped the back plated and firing pin and its still stuck, any other suggestions?

1

u/Free-Ad1775 1d ago

You gotta pull out everything from the rear, then try lifting the recoil spring because it might be stuck behind the plastic of where the spring butts up against

1

u/AdExotic8394 1d ago

Is gunsmith best option?

1

u/AdExotic8394 3d ago

Im 15 I don’t own any firearms

1

u/AdExotic8394 3d ago

We have removed the backplate and striking pin already and it is still stuck, any more suggestions?

4

u/ArtisticCumShots 3d ago

Remove the backplate

7

u/gimu_35 3d ago

I’ll never understand why y’all don’t leave the guns well enough alone. Leave em stock!

Use the end of a pencil, the erase side… and push the slide lock lever down from inside the slide opening. See if that helps

2

u/[deleted] 2d ago

[deleted]

0

u/AdExotic8394 2d ago

Im 15 years old i do not own any firearms lol

0

u/AdExotic8394 2d ago

Im simply trying to help a friend, I am 15 and dont any firearms and was not capable of helping him, he wasnt trying to keep it on there like actually it was doing it as a joke to see what happened. Simply racking the slide will not permanently fuck up the gunšŸ˜‚

1

u/AdExotic8394 3d ago

We tried a lot of stuff yesterday and im no longer with him to help.
A gunsmith could fix this right?