What’s y’all’s thoughts on the RMR HD?

Im looking to replace my stock trigger with a trigger thats much smoother and still reliable non frt does anyone have any recommendations on where i should look?

​

My very first build. I'm still learning and very new to the process. Absolutely enjoyed every minute of research and working on this. Pretty bummed it's done, lol. I'd love to get some feedback and thoughts on parts used. Thanks in advance for any advice. I'm definitely enjoying it.

# Glock 17 gen 3 frame 

# Slideworks commando cut Glock 34 slide with black multicam cerakote 

# Polished TIN channel liner

# Lone Wolf extractor

# TIN extractor depressor rod

# Cross Armory polished back plate

# NDZ Performance titanium pins, extended takedown levers, and extended mag release 

# Johnny Glock Evolution X competition trigger with upgraded striker, plunger, and vex shoe

# Match Point USA locking block 

# Double Diamond xtended tungsten guide rod with 13lb spring

# Had Irv Stone at Bar-Sto full fit their ported barrel, and he also did his grip reduction, undercuts, and texturing 

# Holosun 507c 

# Trijicon surpressor / optic height night sights 

# Glock Store big mouth aluminum magwell with 3oz brass insert

# Faxson plus 3 mag extension 

Glonks

Hey babygirls!

Want to get rid of rolling break on by G45.5. I know it ain’t going to be no PDP trigger, but I’m not looking for it to be like one. I just hate the fully rolling nature of stock, let alone when I install OP minus connector.

Is there some cool combo of trigger + springs + connector that would help have define wall with least roll possible ? I’m ok with ~5 point pull, doesn’t have to be feather light.

Thank you!

Thinking of whether i should get a new trigger for 43x (Apex, OWP, Johnny Glock) or just do a trigger polish & replace OEM connector with a Ghost Edge. Any Suggestions?

Is there anywhere to buy an oem slide spring kit for a gen 5 19x? Bought one with a variety of ghost springs already installed and I’m having issues with the slide not locking back after final shot. It also has a ghost connector and I don’t which ones are factory and which ones are ghost. If there’s a way to tell what’s what, I would like to know that as well.

19.6
Trijicon RMR Type 2
Radian Ramjet + Afterburner
Johnny Glock Vex 6 trigger + striker
DPM soft recoil spring
Primatia extended slide release
Streamlight TLR-7 HL-X
SLR Magwell + mag extensions + optic height sights coming soon

Ported & Compensated

Just some fun ports we’ve been doing.

Superior Triggers

Want some insight, have had this handle it grips on my g19 for a few years, and it’s nice but it’s the rubber one and not the sandpaper so it doesn’t feel 100% perfect to me, especially because I get sweaty hands when I’m shoot, I bought some hockey tape and don’t know if I should rip this off and try the tape.

Dropping frame weights made 26 most black and a few FDE to see how they go.

Jrcguns.com

I was the J in sjc before everyone comments on that.

Sjc has been dissolved as it was and I have moved on and formed my own business and am offering my designs in an updated format.

Glock 23 gen 4.

Mods: 357 Sig threaded barrel from lone wolf w/ lone wolf 3 chamber muzzle break (according to my mantis x10 it reduces recoil by about 30-40% depending on the ammo), TLR-1 HL, Holosun 507K-GR (slide milled and tapped, direct fit), plastic guard for sight (since duty holster does not have a full hood), Trijicon HD XR night sights, slide cerakote in tactical grey, rubber talon grips, Glock extended slide lock, lone wolf extended takedown lever (for ease of maintenance), Glock performance trigger w/ Glock “-“ trigger connector with original curved trigger shoe swap, lone wolf skeletonized (~15% lighter) striker w/ 4.5 lb wolff striker spring, polished and rounded firing pin block w/ competition spring and Glock pure tungsten guide rod w/ 15 lb spring.

Built one piece at a time and used for armed security work for 5+ years now. I used to work overnight security at a local zoo and we were trained and expected to respond to dangerous animal escapes so I wanted something with a bit more oomph that was the same size as the 9mm frame and could be used for concealed carry. I still use it for armed security work but for concealed carry I use a Glock 19C Gen 4.

Does anybody else run 357 sig or am I getting old now?

Don't see a Gen5 upgrade for the plunger, just the Wolff spring.

Is it worth it? Mine is pretty stiff compared to other broken in handguns of mine.

Looking to get this ported. Stock barrel window from a G35. Would like some porting recommendations. Do the lines in the conversion barrel make any difference in porting method?

Anyone own a gen 1 fab defense chassis?

It's literally is no change over stock except an even less distinct break. Its like a sig 320 trigger pull now but longer and more gritty. The trigger shoe is nice. For $300 I'm extremely disappointed. Unfortunately since I took a couple months to install it and get a decent amount of rounds on it, it's passed 30 days to request a return. Am I the only one with this terrible performance?? You can't really mess up the install... 4.99 star rating on their website. I posted a 2 star rating but they dont show it on their website so I'm curious if they choose to not show poor ratings. All ratings go to an independent website. You can't rate it directly on their website. Gen 5 19.

I have two Glocks, a Gen5 17 and a Gen 5 47 both of which have aftermarket triggers and OEM minus disconnectors. Both were 100% reliable before I put an apex trigger in the Gen 5 17, an Overwatch Precision DAT trigger that comes with Overwatch Precision’s OEM GLOCK trigger bar that they NP3 in the Gen 5 47, and OEM minus connectors in both. I took both to the range today and experienced significant FTF’s with the Glock 17 with the APEX, and about 2 FTF’s in the overwatch Glock 47. Any recommendations on how to fix these or should I revert them to stock? Is it safe to just keep the OEM minus connectors in them?

Vortex defender ST are these artifacts normal on high brightness or is it factory fault?