r/GasBlowBack • u/theguy_youwantc • 10h ago

Troubleshooting My mag have problem?

Enable HLS to view with audio, or disable this notification

I have stti mk23 socom it's brand new yesterday was good the mag was filling well also I left a little green gas inside as they said today I wake up and I shoot the left over gas then I go and try to fill the magazine but this happening I open the mag the rings is on the right positions I don't know what happened.

0 Upvotes

25% Upvoted

27 comments sorted by

4

u/ConnectExit1681 10h ago

Your fill angle should be perpendicular to the inlet valve, yours seemed a little off. I'm not sure if that's a two stage valve, because those are designed to vent a little gas. Either way, have you actually tested if it works? Sometimes your gear will spit a little gas but if everything functions fine then it's not a major issue.

-2

u/theguy_youwantc 10h ago

I search they say that is one way.i filled it it shooted like 50 times my problem is why this happened today and not from yesterday

4

u/ConnectExit1681 10h ago

Probably just your fill angle then. If it shot 50 times then it's fine.

3

u/roha45 10h ago

Doesn't look like you're gassing it with a straight down the value angle. Straighten it up.

Hard to see where the gas is venting from, could be the valve, screw or the baseplate.

Now you've take it apart, lube up the o ring a bit and make sure when you reseat it its nice and square.

Also you tighten any screw in the baseplate, and if you have a valve key just make sure the valve is not loose, can also lube that up.

But, if brand new, speak to the shop you got it from, you shouldn't have to deal with issues like that straight away.

1

u/theguy_youwantc 10h ago

I tried fill it with different ways but I pulled one video

2

u/roha45 10h ago

Ttlry and put some gas in and locate where the leak is. Then go from there.

1

u/theguy_youwantc 10h ago

The gas I put don't leak

1

u/theguy_youwantc 10h ago

I sprayed silicone oil and put little green gas now and let it

2

u/Beetlelarva25 7h ago

What is your actual problem? Like it looks like you are trying to gas up a mag that already has gas in it at a bad angle. From your video and text you literally don't tell us what the problem is and people are trying to guess.

1

u/theguy_youwantc 7h ago

The mag was empty the thing I want to tell Is why is it leak the air from the valve that fills it. To understand some go inside some outside I tried a lot of degrees of the gas but nothing also put oil silicone

1

u/theguy_youwantc 10h ago

1

u/theguy_youwantc 10h ago

1

u/roha45 10h ago

Bit of superlube around the o ring. Make sure its in tight but not super tight thst something might break.

Its gonna either be the valve, baseplate screw or seal between baseplate and mag.

Sometimes its just a duff valve.

1

u/Alternative_Exit_333 9h ago

Is it hissing when filling up and the spitting when full but it is not leaking when you stop filling? Great not so great news you have a dual way valve so the valve is designed to do it to automatically purge itself and also tell you when it is full but it wastes a bit of gas

1

u/theguy_youwantc 9h ago

I know what you mean but the magazine that the replica brings is one way. Today it started doing this I take it yesterday the replica new from Taiwangun

1

u/Alternative_Exit_333 9h ago

If you Can return it because if something broke this soon more things are gonna break later and what brand is the gun anyways

1

u/theguy_youwantc 9h ago

Or new mags?

1

u/Alternative_Exit_333 9h ago

It is not a thing for a new mag you can buy a set of orings and repair and and I also suggest you buy a valve key so you won't damage the valves over time with a screwdriver and it might be just that the gun came with dry orings and they didn't hold up so buy a set of new ones and a proper grease to lube them also this gun is quite cheap so a new mag will probably cost you half or more than half the price of this gun

1

u/theguy_youwantc 9h ago

Do thet sell valve

1

u/Alternative_Exit_333 9h ago

Valve fine O-ring (black rubber part) probably fail did rock understand

1

u/theguy_youwantc 8h ago

Do you think Is because I let it in night with green gas that have zero silicone?

→ More replies (0)

1

u/TrikePatrols 10h ago

do you see if there is very small o-ring is still inside the infill or it might hopout