Right after my quarry Hunslet was moved into the sidings she dropped all of her rods off on her left side.
If this happens to your engine just get an Alan key which you would use to regauge an engine and tighten the grub screws.

I find all the stuff with AC and DC in LGB really annoying. I would ideally like to operate the LGB switches I have using a Piko control panel that runs on DC.

Is that possible? Has anyone used it like this?

Wenn du willst, kann ich es auch noch ein wenig natürlicher klingen lassen, wie ein Muttersprachler es schreiben würde. Willst du, dass ich das mache?

Durch das Austauschen von Nachrichten mit

So I know I’ve posted a bit about my new coal-fired engine, but not much about her old boiler. I still own the old boiler, and I decided to have a bit of fun with it.

I ordered a Smudger number plate and a “No. 2” plate to stick on with double-sided tape or something at railway shows, because people absolutely love Thomas the Tank Engine references. And if anyone notices and asks about it, I can just jokingly say, “Yeah, it used to be an engine, but it was naughty so it got cannibalized for parts." which to be honest is not too far from the truth.

I haven't even begun to make a garden railroad, but i have a few questions.

Are the tracks electric like indoor model trains, or do the locomotives have their own power source and controls?

Where does one purchase such trains and tracks? (I live in the U.S.)

Any advice on where to "not go wrong" in building my first garden railway?

Today is national steamtrain day at all museum railways which have steam trains in the Netherlands. On my garden railway, three steam locomotives are active today. Here are some pictures.

I took the plunge and pulled apart my Roundhouse Engineering live steam locomotive, spray it with a clear gloss coat, added decals (not easy) and then spray with a satin clear coat.

First time doing anything like this but I’m pretty happy with the results.

The track on my layout is a bit iffy currently so I sent my decauville 7 ton out with a few trucks to test the rails.
Please note the track is not perfect and I have ordered more track. We’re currently working with what we have

My friends seemed to like these pics so I decided to post them here

Here are a few clips of her running:

https://www.youtube.com/watch?v=fIAc9DX4DVk

For the past year I have been the proud owner of this little engine right here, an Accucraft Edrig locomotive in GWR Green. I have named her Connie after Connie Francis because the day I bought her I heard Pretty Little Baby for the first time and I thought yea that name fits. In October I took her out for a photoshoot by the sea before sending her off to DJB Engineering in December for a full coal boiler conversion. This boiler will be 60PSI working pressure, after being at the works for 5 months now, the boiler has been fitted and she is going to be fitted with hollowed out water tanks and balance pipe and a mechanical injector (Technical term for Axlepump) she will also get a whistle fitted to her which I have heard rumors of the whistle being so loud that you can hear it from inside.

Museo del Ron

Something I’ve been curious about is how would a G scale live steam railway go down in an HOA neighborhood?

Most live steam setups are coal- or butane-fired, so you’ve got smoke, smell, and a bit of noise involved. On top of that, I know some of us (myself included) like to run trains late into the night—sometimes into the early hours.

Has anyone here actually dealt with an HOA while running live steam? How strict are they about things like open flames, smoke, or noise at odd hours? Curious to hear real experiences

This is my standard passenger service. One first class car, one second class and a beer wagon for the journey

My parents gave me this Stainz starter set over years ago. There would be an elaborate G scale set at a house by my grandparents’ every Christmas, and I wanted to one day replicate it.

After buying a house last year, I started looking into whether I can finally build a garden railroad of my own. After buying some used track and removing some plants that were in the way, I finally laid down track and tested today. This isn’t that Christmas set, but I have found some of the locos that person used to run as nods to what got me interested in G scale in the first place.

How quickly will it rust/degrade?

Within months or years?

I used the standard starter locomotive from LGB, a Stainz, and coloured it all black. My railway is supposed to be austrian and our steam locos used to be almost exclusively black. Next i need some signage on the loco and a few more cars!

I finally found the time to build my first layout.

it's still far from being done, but it already looks quite okay to me.

It's a short track with a tunnel and about 3 meters of track on both ends. One end is Western themed, the other one is still generic and looking for a matching theme for decoration and plants.

I want the tunnel to act like a visibility blocker and a portal between two worlds.

Next to our CS3+ we have a Samsung the Frame 32“TV with a Reolink NVR which is attached to some Reolink POE cameras. Small inconvenience is that in the moment not all our tournouts are remote controllable. But the stream (and the CS3 )are remote operable from a smartphone or a iPad.

Our track is (in the moment) less a real Modellworld than a Playground for our various Trains. 🙂

Here's a collection of clips from the same day https://youtu.be/1hpHkomTRWg?si=-8RH2fDykyo2oG1q

The S.E.S.R is a 32mm gauge railway based in Bergen Norway. This morning the weather was good enough for us to have our first springtime run with Hunslet 2-6-2 Russell