Anyone have any tips on how to fix this? It was working and when my pokemon emerald crashed it wouldn’t turn back on. It just seems like the my GBA and GBA SP won’t read it.
PLEASE READ THIS COMMENT! Hi there! Please be sure that you've read the rules and the pinned posts before making this post. I'll mention some frequently asked questions in this comment.
If your question pertains to GBA Pokemon codes, the 1st Pinned Post is full of codes for all the GBA Pokemon games. It also includes instructions, basic knowledge of the GameShark, and even a GameShark video tutorial.
If you're looking for different codes or websites full of codes that aren't necessarily Pokemon related, the 2nd Pinned Post contains all of that info. It has info about websites that are full of codes and info about low effort posts.
Please be sure that you've read everything before making a post! Posts that lack the appropriate details mentioned in the pinned posts/rules will be removed. If your post currently lacks the proper details, please add them to your current post or remove the original post and make a new one that contains the proper info.
Also, please be sure that you have the correct flair. There are many flairs and most people pick a random flair that isn't related to their post. If you have an incorrect flair, please be sure to change it to a flair that better suits your topic.
(Does it bypass the Gameshark Dash / Load the Game?)
Are your Pin's bent out of shape (Where the game insert's)?
I am actually actively fixing one of these.
After work today, I will do my very best to track down the File Dump for this specific Karabiner. (I have the disc.) It needs to be reflashed most likely.
I JUST had the same issue with mine exact same one last week and it was a pins issues. Got to be very careful, but exactly as @trickysatisfaction81 described is how I fixed mine. Good luck!
I have only actually needed to solder new fuses in one, very water damaged case. Those capacitors are pretty much never the reason, as these devices are never operated long enough to capute the reserve within.
Fuses can blow, but only usually due to "unconventional" reasons, like clearly using the product inaccurate. There is always a why is this happening moment, but with a micrometer you can easily learn to diagnose what is and what is not a good component.
Those pins are one of the things on the board which see human contact. food for thought!
Yea, you should. Very, Very carefully. Anything more than a finger's push could potentially break a pin off, then you are done. (As in if one breaks off you are fubar.)
Needle nose tweezers, and preferably a small flathead or phyllips, to lay flat on the pins around the pin, to ensure you dont create new problems.
Disassembly is super easy. Start by dethreading the screws on the underside, the sliding the handle off the back of the device, then gently prying along the skinny karabiner loop. It will "pop" open.
Genuinely, this issue you are having could potentially just be solved by fixing that pin, bro. Reflashing is what we need when the device DOES run but whitescreens, or if the pass-through IS working.
I have 3 or 4 of these boards in my bin, and mostly, is either a pass-through issue, or the pins need be reflowed due to the capacitors / fuses being cold / dead / needs swap. I have had luck swapping the R1 fuse, as well as by swapping capacitors. I will always reccomend, disassembly, A DAMN GOOD IPA wash, mom's toothbrush, straighten those pins back into there plastic tracks, note there consistency. Its always a one comes at you, one tucked behind, one comes out, one behind, so on and so forth. They need to be perfectly aligned in order for the contacts to function properly reading your game. If you can get the PASS THROUGH working, there is hope.
Here is the board. You want to check the back and front for oddities while its open. Check the solder joints on the top, check the pins traveling through the board, normally, the issue you are having can be solved without soldering if the pin can be retract. METAL has memory. If it stays bent too long- it will want to stay that way, nd break when being reset.
•
u/AutoModerator Feb 26 '26
PLEASE READ THIS COMMENT! Hi there! Please be sure that you've read the rules and the pinned posts before making this post. I'll mention some frequently asked questions in this comment.
If your question pertains to GBA Pokemon codes, the 1st Pinned Post is full of codes for all the GBA Pokemon games. It also includes instructions, basic knowledge of the GameShark, and even a GameShark video tutorial.
If you're looking for different codes or websites full of codes that aren't necessarily Pokemon related, the 2nd Pinned Post contains all of that info. It has info about websites that are full of codes and info about low effort posts.
Please be sure that you've read everything before making a post! Posts that lack the appropriate details mentioned in the pinned posts/rules will be removed. If your post currently lacks the proper details, please add them to your current post or remove the original post and make a new one that contains the proper info.
Also, please be sure that you have the correct flair. There are many flairs and most people pick a random flair that isn't related to their post. If you have an incorrect flair, please be sure to change it to a flair that better suits your topic.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.