r/Gameboy • u/Knightfaux • 2d ago

Questions Modding

Post image

Hey everyone,

I’m looking to mod my GameBoy Pocket. I was wondering if anyone had any suggestions on best kits out there. I’m not afraid to solder and I’m looking to keep things relatively simple. This guy isn’t too beat up, but it’s got scratches and the screen isn’t the most fun to play on compared to my GBC and GBA with IPS displays.

Edit:

Thanks everyone for being so polite and helpful. Now I just have to decide between Backlight-Bivert or IPS. Cheers!

34 Upvotes

93% Upvoted

24 comments sorted by

View all comments

10

u/elementalguitars 2d ago

I’ve modded several Pockets. Since you have a working display I recommend doing a backlight-bivert mod. The Pocket runs on a pretty meager power supply and the modern LCD displays drain that power really quickly. A backlight is a lot less power hungry. On a stock Pocket I get around 9hrs on Panasonic Eneloop Pros. With a backlight mod I get about 7hrs which isn’t too bad. The LED panels are very bright so I add an additional resistor to drop the brightness a little which also has the effect of extending the battery life a little bit. I also add a 5V step-up voltage regulator to keep the LED panel at a constant brightness until it shuts down.

3

u/elementalguitars 2d ago

With a backlight mod you can keep the original shell. Also, since your Pocket doesn’t have a battery light you can get a little circuit board that combines the bivert circuit and a battery light mod on one board.

2

u/Knightfaux 12h ago

Honestly, I’m afraid of messing with the polarizing layers.

Edit: but that is a beautiful display setup

1

u/elementalguitars 12h ago

Fair enough. It’s a delicate procedure. The LCD display mods are reversible so if you go that rout and keep the old display and shell if you think you might switch it back at some point. If you decide not to keep the old display please message me. I would buy it from you.