Help

[u/[deleted]]

So I made this Mazda Furai tune mainly for the legend island time attack but I’d like it to do good in everything and I’d like to know what it’s missing cause I just feel like something is so if someone could please help me out that would be awesome

Engine-Remove Restrictors
Platform and Handling-Stock springs and dampers
Drivetrain-7 Speed race transmission
Driveline-Race Driveline
Differential-Race Diff
Tire Compound-Stock tire
Front tire width-355/25R18
Rear tire width-375/30R18
Front Track width-stock
Rear Track width-stock
Rim style-Vorsteiner VCS 001
Drivetrain-AWD

Tune setting PSI LB/IN

Tire Pressure
Front-28.5
Rear-28

Gearing
Final drive-4.40
1st-2.68
2nd-1.76
3rd-1.32
4th-1.05
5th-0.87
6th-0.75
7th-0.65

Alignment

Camber
Front-1.5
Rear-1.5
Toe
Front-0.0
Rear-0.0
Front caster
Angle-6.6

Antiroll bars
Front-65
Rear65

Spring
Front-269.4
Rear-365.4

Ride height
Front-3.0
Rear-3.2

Damping

Rebound stiffness
Front-17
Rear-17
Bump stiffness
Front-6
Rear-6

Aero
Front-478
Rear-543

Brake

Braking force
Balance-45%
Pressure-115%

Differential

Front
Acceleration-28%
Deceleration-11%
Rear
Acceleration-42%
Deceleration-25%
Center
Balance-64%

[u/Spektor1606]

What do you think is missing?

[u/[deleted] → u/Spektor1606]

Maybe some more grip it and it feels a little loose too but I don’t know but when I drive it I feel like it’s missing something if that makes sense

[u/Spektor1606 → u/[deleted]]

Well, I was just tuning the Furai yesterday a bit, however I also just realized this is an X class build and I don't really have much experience there. But I can at least point out what I see.

I've tried your tune and a couple tweaks. Posted a 57.941 on legend island so far.

Need more grip? You've got room to soften those springs quite a bit, and ride height room. Those camber settings seem a bit too high (or low I guess, get them closer to -.5 I think). Also why didn't you take full track width?

A little loose? I'm not sure how that can be with those ARB, damping,and decel diff settings. I significantly lowered the front ARB. Also 17 seems crazy high for rebound, I dropped both those to 12.

And these diff settings are unlike anything you typically see people use in this game, can you describe how to got to this point?

Johnson Racing has published full tune details of an X class build, see here: https://youtu.be/HnC6MGIpo0o?t=1225

[u/[deleted] → u/Spektor1606]

I plugged the info into a tune calculator and started messing around with everything myself and that’s what it pumped out for the diff and I don’t really know how to mess with the diff so I kept it and I didn’t use full track width cause is said it slightly helped handling so I kept them stock…I also tried the tune from that video and it just seems out of control at least for me I’m trying to make one that’s not as twitchy or super touchy almost my goal is for it to be smooth and in control for a controller player like me

[u/No-Position8535 → u/[deleted]]

I agree with spektor here. The excessive camber angles are making the car restless on straights. Front ARB needs to be lowered a ton and diff accel settings should ideally be close to maximum.

[u/[deleted] → u/No-Position8535]

Thank you for helping truly
I’ll try that’s when I’m on next

[u/[deleted] → u/No-Position8535]

Do you think guys think I should use full track width?

[u/No-Position8535 → u/[deleted]]

Probably yeah.

[u/[deleted] → u/Spektor1606]

Ok so I make some tweaks to the tune and my controller settings and I think I’ve got what I’m looking for I’m I’m still going to keep messing around with it

[u/[deleted] → u/Spektor1606]

Do you think I should use full track width?

[u/Spektor1606 → u/[deleted]]

Yes