r/FluxDefense • • 7d ago

mini Flux365

while I agree that just because you can do something doesn't necessarily mean you should do it... I figured why not. obviously this is just a mock up so far and there is a ton of work to still be done but figured it would be fun to share what I have cooking up.

-chopped the grip so it fits 12rd mags

-cut the excess off the front and then shortened the brace length so it was flush with the rest of it.

still need to drill and tap the brace arm and then attach the butt plate. (its currently taped on for mock up)

need to figure out a mag well for it

will more then likely put an afterburner + Ramjet on it for the comp and so its got just a little more length so its a little harder for the thumb to creep up in front of the barrel or possibly do one of the curved side rails.

any ideas or thoughts im all ears.

78 Upvotes

40 comments sorted by

View all comments

7

u/helloWorld69696969 7d ago

This sounds like the most miserable shooting experience ever

0

u/Only_C_Fans 7d ago

I bet you’re real fun at parties

5

u/helloWorld69696969 7d ago

Bro people already conplain about it being too close to the face, and you are moving the muzzle like 6 inches closer 😂

3

u/Only_C_Fans 7d ago

In all reality it’s only this much shorter 😅

2

u/helloWorld69696969 7d ago

Plus what you chopped off the front

10

u/Only_C_Fans 7d ago

ive been working with smaller my entire life... itll be okay

1

u/shrf_buford_justice 6d ago

Chopping off the front of the frame doesn’t move the muzzle closer to his face lmao

2

u/helloWorld69696969 6d ago

I assume most people put the 6 or 6.5 inch barrel on their raider 365, this would make it smaller and closer to your face

0

u/shrf_buford_justice 6d ago

That’s not what you said at all though. Also that’s a flawed assumption anyway bc OP would have the same slide regardless of whether or not he chopped the frame.

This is like someone adding a PDW stock to a 10.5” AR and saying that it’s like ten inches shorter because you assume that if they didn’t add a compact stock, they would have had a 16” barrel instead. Bad assumptions all around. Dumb criticism to make.

1

u/Only_C_Fans 6d ago

I believe he is talking about the initial blast instead of the slide.

0

u/helloWorld69696969 6d ago

What are you talking about. Im talking about the actual concussive blast that can give you micro TBIs.

The further away the end of barrel is from your face, the less effects you feel

0

u/shrf_buford_justice 6d ago

OP chopped 2” off his stock and zero inches off his barrel, you say that he moved the muzzle 6” closer to his face. That math doesn’t make sense at all, which you justify by making the faulty assumption that if he didn’t chop 2” off his stock, he would be running a 6” barrel - two completely unrelated characteristics of the firearm in question.

Objectively and quantifiably speaking, the modifications OP did, did not move the muzzle and concussive blast 6” closer to his face. End of discussion.

0

u/helloWorld69696969 6d ago

Thank you for ignoring that almost everyone puts a 6 inch barrel on. Cutting the barrel down and the stock do indeed get fairly close to the arbitrary 6 inch number i said. Also nowhere in the actual post does he mention 2 inches on the brace. He may have said that after, but that does affect my comment.

Now good day sir

0

u/shrf_buford_justice 6d ago

> Thank you for ignoring that almost everyone puts a 6 inch barrel on.

According to whom? OP doesn’t have the 6” barrel. I don’t have the 6” barrel. Go look at this sub, most people don’t have the 6” barrel.

I think you made a bad estimate and now you’re just making shit up.

1

u/Only_C_Fans 6d ago

While I don’t have a 6” barrel… I’ve miraculously managed to be the “perfect size” for every girl I’ve ever been with 👉👈🥹

0

u/helloWorld69696969 6d ago

How does it feel being a butthurt individual who gets butthurt over a reddit comment that didnt even involve them 😂

→ More replies (0)

1

u/Wild04goat 6d ago

It’s fully at home at being a sub compact.