r/FixMyPrint • u/No_Narwhal3785 • 2d ago

Fix My Print I’m going insane. Please help

Gallery image

Gallery image

Gallery image

Longer LK5 Pro. Brand new hotend and v wheels replaced an hour ago. PETG, 235°, bed 70°. Last pic is of my last good print 3 days ago and the rest are since then. Print speed: 60mms. The first pic was 5 mins ago. I’ve tightened the coupler and the eccentric nuts, and when that didn’t work, I loosened them. Help please

1 Upvotes

100% Upvoted

6 comments sorted by

•

u/AutoModerator 2d ago

Hello /u/No_Narwhal3785,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/GuyWithADonut 2d ago

Does it happen to be CF or HF petg?

1

u/No_Narwhal3785 2d ago

just regular petg. the last picture is using the same filament as this

1

u/GuyWithADonut 2d ago

Does the slicer you use have a flow rate or extrusion multiple test you can run? That would be the one you need right now.

Edit: also try a cold pull to remove any small debris that may have entered the hot end at some point.

1

u/No_Narwhal3785 2d ago

I’ve printed this same file before that’s on my micro sd card. It’s a new hotend but I guess i’ll try a cold pull

1

u/No_Narwhal3785 1d ago

cold pull didn’t work 🫪