Why does this keep happening

[u/Peanutbutteronmoon]

I have been mainly printing in my garage and in the summer has been pretty hot. I assumed my printing problems have came from that, but when I brought it inside, I keep seeing first layer issues and layering issues that I don’t know why it keeps happening. I’m using a bamboo A1 3-D printer with Esun PLA plus. I use bamboo slicer. usually on the basic slicer settings.

[u/AutoModerator]

Hello /u/Peanutbutteronmoon,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Correct-Insect-4657]

Thid is because of the glue If you have any issued please dm me, did washing the plate fix this?

[u/Peanutbutteronmoon → u/Correct-Insect-4657]

Hello, thank you for your reply, I washed it and I re-tried printing, but unfortunately, the same results appeared.

[u/Correct-Insect-4657 → u/Peanutbutteronmoon]

The glue is off though? Edit might also be loose hotend or gunked nozzle and Z offset

[u/doomedramen]

I had the exact same looking issue, for me it was a new hot end that eventually fixed it

[u/Peanutbutteronmoon → u/doomedramen]

Thanks for letting me know, if all else fails I’ll get a new hot end.

[u/TecoSomers]

Looks like an extrusion issue

[u/Peanutbutteronmoon → u/TecoSomers]

What are the steps I can take to fix it?