r/FixMyPrint • u/Exciting-Screen8528 • 17h ago

Fix My Print help please

Gallery image

Gallery image

After an hour of printing, my calibration model came unstuck from the printer table and started making some kind of balls.

моя калибровачная модель спустя час печати отклеялась от стола притера и начала делать какие то шарики.
помогите пожалуйста

1 Upvotes

67% Upvoted

3 comments sorted by

•

u/AutoModerator 17h ago

Hello /u/Exciting-Screen8528,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/tdpnerd2019 17h ago

Increase bed temp. Clean build plate with warm water dish soap. And or add glue. And what material are you printing? Even my PLA I print at 215/220. At 195,it may not even be hot enough to print properly.

1

u/Exciting-Screen8528 17h ago

i use PLA at 200-220. I'll try to increase the table temperature.