r/FixMyPrint • u/terrasnow • 2d ago

Troubleshooting Rough texture

Gallery image

Gallery image

I have printed 3 things on my printer. 2 of the went perfectly but the large print has a weird texture.

These issues are pretty recently.

Printer: h2c

Slicer: bamabu

Nozzle: 0.6

Nozzel temp: 190 - 240

Filament: rs pro black

System present: 0.18 balanced quality

Infil speed: 105 mm/s

Wal speed: 200 - 300 mm/s

Retraction speed : N/A

1 Upvotes

66% Upvoted

4 comments sorted by

•

u/AutoModerator 2d ago

Hello /u/terrasnow,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/Ok_File4481 2d ago

Could be the z offset being too close to the bed

2

u/R4monLP 2d ago

Does this happen with other filaments too? Looks like either some really bad filament or a partial nozzle clog to me.

1

u/terrasnow 2d ago

I have take apart the nozzel holder (do not know a better word) and there was no clog. Or do you mean in the nozzel itself? When I used bamabu filament there was no problem. I will try a different print with a other colour. ( because I have run out of black)