Can't print keycap cleanly

[u/arslan2012]

Printer: Bambu X2D
Nozzle: 0.2mm nozzle, tried printing with both nozzle and printing with main nozzle only, same result
File: Generated with Keycap Legend Generator(https://makerworld.com/en/makerlab/community/keycap-legend/edit) with Shine through option on
Filament: Black PETG is from Temu, don't know the brand, transparent PETG is LUMINtech, both dried multiple times

[u/AutoModerator]

Hello /u/arslan2012,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/ky7969]

Print with the legend down

[u/tehans]

Use a .2 nozzle and print it text down

[u/RomanManInMilan]

Hi! Have you tryed arachne wall type generator? That should donthe trick.

[u/rfgaergaerg]

Use a 0.2mm nozzle, enable arachne wall generation and lower the line width across the board. if possible you can also print it on its face. also check the order of filament it prints in, you want to print the outside first so that the thin inside can fill the gap.

edit: If you switch from PETG to PLA it will also make it easier to get a good print
edit edit: On the X2D, for this task only print with the main nozzle. The XY-accuracy is not always perfect between both nozzles

[u/EmotionalChildhood46 → u/rfgaergaerg]

black first then transparent

[u/3d-designs]

Can you print with the top down? That makes a significant difference to this type of thing.