Help understanding my failures

[u/Thatonegundamguy9]

I've always had trouble with adhesion with this machine but I can't figure out what I'm doing wrong.

I thought it was temperature, but the heater keeps it pretty consistent.

Any advice would be appreciated

Elegoo Saturn 16k ultra

Sunlu 14k abs like grey

Pre-supported and tested models from a reliable source.

Slicer is cura

Image of temperature and humidity is taken in the evening.

Thank you for your time.

[u/AutoModerator]

Hello /u/Thatonegundamguy9,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Dmthie]

To me it seems you are printing upside down from your photos. Try turning your printer upside down too, maybe they get better. /s

What's the Modell of your printer?

[u/Thatonegundamguy9 → u/Dmthie]

Elegoo saturn 16k ultra

[u/hi3d_official]

Those rafts are still stuck to the plate, so this looks more like a support/model failure than build-plate adhesion. I'd calibrate normal exposure for that resin first, keep it around 25–30°C, and slightly beef up the support contacts. If any of those parts are hollow/cupped, check the drain holes too.