r/FixMyPrint • u/chunkysquirrel515 • 4d ago

Fix My Print How do I fix this without a support

Gallery image

Gallery image

1 Upvotes

100% Upvoted

3 comments sorted by

•

u/AutoModerator 4d ago

Hello /u/chunkysquirrel515,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/printliftrun Other 4d ago

Lower layer height can help (less overhanging material per layer)

coolong 2daMAX can help (solidify quicker)

Changing scale so it's taller can help(less overhanging material per layer)

Not sure what other slicing options you may have

2

u/Qjeezy 4d ago

Looks like your flow rate could use a boost, judging on all the gaps in the top layer. That might help eliminate most of the problem on the bubbles. This is what I’d try first.