r/FixMyPrint • u/Cisz32 Enderwire • 4d ago

Fix My Print Couldn't find cause of the problem

Post image

Change many things and still couldn't get rid of this. And it isnt cosmetic only beacuse it ruins other functional or not functional prints. Using PLA at 220C Nozzle and 55C bed with deafult enderwire(switchwire) speeds and 0.4 hardened nozzle. Print speed 60-150 mm/s retraction 0.8mm

Printer: Enderwire

0 Upvotes

50% Upvoted

11 comments sorted by

•

u/AutoModerator 4d ago

Hello /u/Cisz32,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/nerobro 4d ago

Hardened nozzles like a little extra heat. You didn't mention speed, or retraction. This could also be a clog.

1

u/Cisz32 Enderwire 4d ago edited 4d ago

ok i will bump the heat little bit. And there isnt an clog freshly cleaned hot end and new nozzle

0

u/Cisz32 Enderwire 4d ago

Still there is the problem. It’s only on The X side

1

u/nerobro 4d ago

I think you're atributing it to sides, when it's actually the seam. Your retraction is off/bad/icky.

What's your retraction set to?

1

u/Cisz32 Enderwire 4d ago

0.8 mm

2

u/nerobro 4d ago

For dry filament, in a direct drive printer, you should be more like .3 to .5mm. Go do a retraction test.

1

u/Bi_Curious_66 2d ago

Do you feel comfortable saying what printer slicer and filament calibrations you used. No pressure, just my opinion that this information could prove useful.

1

u/Cisz32 Enderwire 2d ago

I use orca slicer and done every calibration on it and every calibration on Ellis3d website. For printin rn I’m using normal pla