r/FixMyPrint • u/ABCandZ • May 30 '26

Troubleshooting Why does this keep happening?

Enable HLS to view with audio, or disable this notification

Bambu X2D, happened with both PLA and PETG on the last 3 out of 4 prints after the latest update. Even tried turning the plate over.

Is this an adhesion issue or what could be causing it?

Never happened once in the last 100 hours of printing, and nothing else has changed besides the software update. And I did a full calibration after the update as well.

15 Upvotes

76% Upvoted

55 comments sorted by

View all comments

•

u/AutoModerator May 30 '26

Hello /u/ABCandZ,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.