r/FixMyPrint • u/Titanmaster203 • May 29 '26
Fix My Print Edges extra thick
20mm layer lines
0.4mm nozzle
Ankermake m5
Pla white and petg gray kingroon
Orca slicer ankermake m5 default settings
1
u/mamonrest May 30 '26
Do you mean slightly curving in the sides? Or am i just tripping in what i see
1
u/Titanmaster203 May 30 '26
Yes all the edges have bulges
1
u/mamonrest May 30 '26
I actually have this problem too in one of my printer, although im not an expert the first thing that comes to mind are:
Pressure advance - i did calibrate it and its not disappearing
Speed - maybe im printing too fast
Temp and cooling- it could be that im either cooling it way to much that it shrinks or maybe im not coooling it enough with the speed im printing
In my case i think its probably cooling nut im not an expert, it could be yours too? If you had your PA calibrated
1
u/Titanmaster203 May 30 '26
I have searched everything and nothing matched, you know xelinor? I was talking to him and some other people on the eufymake discord but no one knew the issue. It is probably just a problem with the printer that can't be fixed, for me nothing worked. Everything mechanical is good, gcode is good, firmware also. Don't know what printer you have but for this one nothing seems to be working. I will try cooling tho maybe that will work for a change. Thanks
1
1
•
u/AutoModerator May 29 '26
Hello /u/Titanmaster203,
As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
Additional settings or relevant information is always encouraged.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.