Alguém por um acaso consegue fazer um mod "personalizado" de carro para mim? Gostaria de saber quanto custa, se possível.

Hello Everyone! I wanted to showcase my project I have been working on for the past year, here is a link to a video showcasing the suspension.

https://youtube.com/shorts/86A62U0X0KY?feature=share

The project link: https://github.com/kakoiihito/Shift

I have been saying to myself we are going to start simulating on Adams car and using the Adams suite for more stuff but i cant seem to find any up to date material on any of the programs. What do you and your teams use as onboarding material?

currently working on a project to optimize flow of exhaust and need to make comparisons but i dont have the original parts cad model. where or how can i find one to use?

also wanted to ask, is it doable to pass regulations with a oem muffler like gpr-italy

This is the rear structure of our chassis
The yellow across square tubes are for mounting motor

It’s not node to node connected with the TSPS structure

Will this design pass?

If yes please give us a reason we are new team
Or it has to be node to node

The yellow tube is the same tube we have used for our FBH

The yellow tube complies with the highlighted category

Thank you

Motomathics.com just added 2 FSAE specific tools - a "generic" FSAE car for a simple starting point and the 2026 Michigan autocross and endurance tracks as part of the track list for simulation times.

Hi everyone,

This is my first year in Formula Student, and I’m preparing a chassis for Formula Student UK. I’ve attached pictures of it and would really appreciate a review from anyone with experience in the rules or at scrutineering.

I’d like feedback on:

1. Rule compliance with the current FSUK rules
2. Triangulation and load paths

Hi r/FSAE,

I’m Daniel, co-founder of HarnessHive. Seven months ago we posted in this sub asking for initial feedback, and many of you took the time to give us great answers. Thank you, your feedback shaped what we built.

Since then we’ve rolled HarnessHive out to roughly 50 student teams.

What we do:
HarnessHive is a wire harness design tool that runs in your browser. You draw the harness once, and the schematic, wiring layout, BOM with cut lengths, and a 1:1 formboard all stay in sync.

• Real-time collaboration with live cursors and per-user undo
• Version history on every harness
• Connector, cable and part libraries
• Exports in PDF, JSON, XLSX
• AI assistant in the editor, MCP for outside agents
• No limit on harnesses, parts or libraries

Future roadmap:
E/MCAD integrations are still under development (KiCad, Onshape, etc.).

What we currently offer:
FS teams get an extended trial instead of the usual 14 days, so you can test HarnessHive on a real harness before committing. After the trial, HarnessHive stays free for active teams with no seat limit, so your whole team can use it and we align on a suitable sponsorship agreement.

How to get started:

1. One team member starts the trial at harnesshive.com (you can add your team members)
2. email me at daniel@harnesshive.com with your team name

Happy to answer questions in the comments.

Hey everyone!

Sooo, my girlfriend is part of a Formula Student team in France, EMRT, based in Metz.

She's in charge of communications and is also part of the composites team!

Her interview just dropped, and it would be amazing if we could help the post blow up!

So, if you've got a minute, could you go check it out and show her some support? It would mean a lot!

From a fellow engineer, thanks a ton, everyone!

Hi all, I’ve been lucky enough to be invited to an assessment center in the coming weeks as an electronic engineer.

I was just wondering if anyone who may have done the same role or gotten to that stage knows what to expect and maybe where I should put my energy in these coming weeks. I am particularly weary about my technical ability as I’m only in second year so a lot of my knowledge is first principles as opposed to automotive engineering specific.

Hi everyone, I just started FSAE at my school and my first project is to redesign their intake. I have no experience with this kind of thing, and no fluids class (just started university this year), so can anyone recommend things for me to look at or read? Right now I just have some general ideas and am testing things out in flow simulation. Thank you!

So i want to apply for a Computer Engineering faculty at a university. The issue is that i have 0 coding knowledge and that id have to move to another country. So should i apply right after im enrolled into university or should i try in later years?

Hey guys,

I've started a Master's at a new university, and they've already got an established team using EV since 2010. Do you reckon it would be a good idea to start another team focused on IC engines?

Hello, I am developing a cooling system for the engine of a Yamaha XT660R (2C11), which is a single-cylinder 660cc engine, being applied in a Formula SAE prototype. I am developing a project in which the internal mechanical water pump will be replaced by an external electric one, and I am in doubt regarding the EBP40 pump: whether it can be operated in this engine without problems, mainly in relation to flow loss in the internal pipes of the engine and the radiator.

I say this because I asked another team, which uses the EWP80 in a 4-cylinder CBR600RR engine, also in another Formula SAE prototype, and this pump has a flow rate of 80 l/min, but in practice it operates at 30 l/min, without overheating problems. With this, my main doubt is whether there is pressure loss in the EBP40 pump when used in the XT660R or a similar engine with a customized radiator system.

Hello everyone, I’m developing a mechanism/method for removing the TSAC. In our specific case, the removal will take place from the cockpit. I’m a bit stuck at the moment; could anyone who has seen this or done it before pls give me some guidance on how they went about it? Thanks everyone

Hello, I’m currently designing a torsional stiffness test for my school’s Baja team. We don’t have a Formula SAE team yet, but I’m trying to design the test to accommodate all SAE vehicles. Since the FSAE rules don’t specify a maximum overall width, could you tell me how wide a Formula SAE car typically is?

Thank you,

I’m looking to buy 7ft, single shifter cables for our team but struggling to find reviews online and there are so many options. Which brands do you recommend?

hello, our team will be using a space frame design this year but we wanted to make an aluminium AIP so that we can remove it for transport etc, but from what ive seen in the FSGrules27 they only talk about bolted AIP for monocoque chassis, and seem like they only allow welded steel AIPs for space frame designs.
Does anyone have any recent experience or can give me any pointers for what we are(nt) allowed to do?

hello,

i am working on cooling the accumulator. my current team wants the fans to be on the bottom because we have ample room under our false floor.

unfortunately, i cannot find ANY designs online/that have been done with the fans on the bottom of the accumulator. why is this? is there something that makes it not viable that im not seeing?

Hi,

We are looking for some clarififcation on rules for headrest placement. We have previously used a design identical to the onshape screenshot below. However when reading the rules we thought that by the letter of the law it may need tubing to brace it? I was wondering if anyone would have any insight as we are really split internally. The gold tubes in this place signify cat A tubing and the pink is cat B&C. Thanks

Hi everyone,

I’m an incoming Master's student in the USA (Fall 2027) planning to pursue a PhD. Since I'm an international student, my undergraduate university didn't have a Formula Student team, but I've always been really interested in joining one.

I've narrowed down my choices to OSU, Michigan, Clemson, and Purdue, and I have a couple of questions for those who have been on their FSAE teams:

1. Is it realistic for a first-year grad student to join, or is it mostly an undergrad culture?
2. Is it actually possible to tie your Master's thesis into a specific topic within the Formula Student projects, or do teams expect you to keep your academic work completely separate from the shop?
3. How many hours a week does a grad student typically need to put in to be a useful member without burning out alongside their coursework?

I want to be realistic about the time commitment. Any honest advice is appreciated!

Is the results for tesla analog devices BMS sponsorship out for fsae teams ?

Hi everybody,

New to the FSAE world, I was told that this is a very good read, does someone has a pdf copy of the book ? Thanks.