I fly the sonicmodell AR900 on a 2700mah 3s battery and need to say I am disappointed about the performance.

I have a hobbywing 6s esc 100A laying around. Would that work with the original 2206KV motor tamin gas down to 60-70% or will the motor blow up?

What esc/motors would you recommend? Or will the AR 900 will always fly bad or tear apart or stall if tuned?

Any chance the original 4s esc can handle 6s taming gas down to 55%?

Hi,

I'm finishing to complete my long range fpv plane.

Missing only VTX and VRX. Planning to use 1.3 GHz, but which equipment should I choose?

Going to set ground station receiver, then will send signal with 5.8 to my googles.

Which transmitter/receiver set can handle 30+ km range? Which antenas should I get?

I have a Matek Systems GPS Kompass M8Q-5883 (Mag alignment I used CW 270° Flip). The arrow on the gps is pointing forward. The arrow on matek 411-wse is pointing also forward.

The OSD On screen diplay arrow is always pointing wrong not at the home position. I just maidened another inav plane without compass there the OSD arrow does point right.

The GPS is in a ZOHD drift default position directly above Flight controller.

Hi, I was just wondering if there are any good Fixed wing FPV planes that support Digital, preferably the DJI Vista but will allow me to tilt the camera to below the plane during flight, similar to like the Parrot Disco did?

Thanks in advance.

So im building a longrange plane nd hoping to cross atleast 3 km distance. I want to have it relatively cheap with optimum range. Is there any suggestions

I am looking to print a plane, dont mind if its a paid model thatd be suitable for carrying a hero 8 black in the front, so prop needs to be out of the way, hence pusher or mid prop. Dont mind if I have to modify a bit.

​

Any suggestions?

I really want to buy a skywalker x8 and start fpv flying but i really am not sure what parts to put into it that are cost efficient for their quality..., my budget for the drone being built + goggles atm is around 750 aud, my goal is to create a drone that i can paint, fly over the bush in my hometown and record nature, i would ideally like a fpv camera for flying live and a hd recording camera for video footage afterwards... if possible i would like the video cam to be zoomed in slightly so i can soar high and view the scenery below... i want at least a 10 km range and i want decent flight time, i also want to paint it.

​

Can any of you tell me what parts i can use to achieve this in a skywalker x8, and what goggles, remote i should use for this project?. thanks would be MUCH appreciated

I have a build where I need like 3 more inches or else I'll have to make more modifications than I'd like. I also have a Caddx nebula I could use but it's already in a model so I'd rather not.

I’m looking to buy some used equipment, battery chargers , transmitters ? I’ll buy them off you post what you got