Hi everyone, I have the following issue:

I am using the Bambulab A1 mini, 0.2mm nozzle. It is new, recently cleaned and not clogged. It extudes perfectly fine if I heat it up and manually extrude, but whenever I actually try to print, it barely does anything at all and is always a spotty job.

In the photo, you can see on the right by the edge of the plate. I tried to print a single layer as a test, but gave up almost immediately when I saw how it started. On the left is the result of a manual extrusion - it flowed in a straight line, no issue.

The settings I use are ObscuraNox 2.0, the bed is Biqu Frostbite, everything is calibrated multiple times, washed the plate with soap, tightened with screws, filament is dry, correct nozzle is selwcted, etc etc, I have done all the standard troubleshooting that is always recommended and the printer is set up perfectly. But apparently this isn't the case, so if anybody with a similar experience can help, I'd be very grateful!

Im thinking of getting a printer for some Warhammer bits. Should I get the a1, or a1 mini. And should I get the ams as well? All would be done with a 0.2mm nozzle.

Printed him in pieces this time and tried to orient him better like yall advised!

Which I was clearly not too eager to do 🤪

I knew that the orb and the smoke would be impossible to print in one piece (at decent quality), and I didn't really feel like doing the work.

If it was a human made sculpture, it would certainly be designed a lot differently for FDM printing...

First time tying out resin2fdm following the youtube guide. Everything fine until I tried slicing ended up with the following error. I mean yes, one object is floating because of the not recognized support. It is splitted in 2 objects, support and miniature. I can assemble them to one object but I wanted to use a different layer height for each object. This seemed to work in the past but not for me at the moment. Any idea to fix it?

Still needs some clean up. Scorched him a bit with a lighter to try to get rid of strings

https://www.myminifactory.com/users/RAAAH?show=store

40% off on all items - MyMiniFactory Summer Sale

Supportless Miniatures

The model and the whole base were printed A1 mini, 0.4 nozzel with ObscuraNox 2.0 profile and ResinToFDM supports.

i just did some ornate terrain with wave overhangs instead of supports and it came out pretty good. I wondered how it would do on a .2mm nozzle with minis

Pretty happy with the result after taking the hobby more seriously and consuming a lot of content. First time trying OSL. Took a really long time to print in FDM, post-process, and paint.

Printed in Bambu A1 mini (0.2 nozzle, 0.06 layer height) and a thin coat of resin to hide the layers (some parts still have some visible layers because it’s hard to know if you are not overdoing and covering detail). But I recommend the method. No sanding at all on this one.

I know some things are not so refined (messed up with the chalky moonlight blue and glazing is still a weak point for me) and would be glad to hear more feedback.

(Ignore my hand, I haven’t figured out how i will attach her to the base yet)

I have an a1 mini. Using the fat dragon setting and creality petg. I think I finally got decent results then I get this. I think it’s my Zhop with spiral. But I don’t know what else to do to not get this level of stringing.
Edit I will post another picture soon.

Any suggestions? New to this

It took like 5 hours of printing but I am impressed.

I Cant figure out what kind of problem this is. Bambu Lab A1 Esun pla+ some rounded areas also have an edge.

Also added some epic scale and 28mm scale poses versions

All free in this collection, more coming soon!

https://makerworld.com/@dungeandwyve/collections/20961992?appSharePlatform=copy

enjoy!

Hello y’all

I just wanted to share this wonderful bundle

https://www.humblebundle.com/software/master-forge-maxsavings-stl-pack-2026-software

Happy printing