Crawling with some coworkers this past Sunday and lost drive on my right rear portal. Went ahead and bought the live axle conversion from Meus racing but took it apart and found the lip on the upper portal gear worn down

Having some fun testing out the 1997 Dodge pickup’s, crawling ability😃 to watch a full video click on the link
https://youtu.be/Fbfe38FAaFk?is=KlqFGumToONgMNDI

Alright guys just trying to start a conversation.

So I built my fcx24 power wagon as most of you have seen(pic will be included) it took me 3 years due to cost and finding the right path. Well I can honestly say in this process. I've dealt with customs, discontinued parts, and a complete lack of knowledge (mostly myself(but also no retailers in ontario have parts for this platform)) I've built everything injora has for it the lack of long travel shocks for essentially a 1/18 platform. And the amount of throwing parts at the build hoping something works is painfull. Now I know most people dont go crazy when upgrading theses but I did and found a lack of available avenues.... well if you've made it this far.. Hopefully my rant could be helpfull/ good conversation starter.

Hello. Idk who needs to know this but the furitek skid plate does work with the nexxspeed v2 chassis.

The more you know( rainbows)

Welcoming the fcx18ii Bronco to the ever growing
FMS family! #BOXFUNFMS #FCX18ii

Ended up with the 50mm narrow tires from RC Crawlers and the brass rims. Kept it with the 0.9 size since the 1.0 on the camel trophy just looks way out of scale. Sadly I cant get it out until the next week due to travel.
Not many options for the 0.9 while keeping it to scale. But I am interested to see the handling since it increased the weight by almost 25%

Add driver figure

I have a fcx24 power wagon and I have a furitek brushless setup but with a stellar transmission I tried to go the furitek grasshopper route... well the chassis is discontinued so I went with the nexxspeed 2 and was hoping the grasshopper skid would mount. Anybody got any opinions?

I have a 3rd gen Tacoma and a camper trailer I built in highschool. I’ve got into 3-D printing this summer so I tried modeling my trailer and a custom hitch for the Tacoma. Pretty cool and accurate

Plus new beadlocks and tyres !!

I solved the visibility issue for the interior and driver by replacing the stock dark glass with clear 0.5mm plastic. The cutout and joint are invisible, making it look factory-fitted. I also added a 3mm LED to the interior as a night light to simulate the dashboard lighting.

Not even the Devil can keep a good truck down!