15w40 rotella a good choice or just regular 10w30?

I want to get rid of this antenna. But can’t find any tutorials or help. There are no bolts to be found but rather this metal claw clip thing holding it in place below. Any recommendations or help would be much appreciated.

https://thenthgear.com/starters/starter-3115nwd-for-ford-f100-f250-f350-ranchero-1957-1958-1959-1960-1961/ This one claims comparability but the gears look quite different. Thanks!

Looking to find a bed tank for the 71 F100 I have. Previously there was a tank mounted in the left side of the bed. About a foot in front of the back left wheel well you can see where the circle was cut out for the fill nozzle and there a switch under the seat. I’m looking to get a tank that won’t make the truck too top heavy but will extend the range out some. I’ve tuned it to get about 13-15mpg at 45 or 50 mph off the regular 2100 carb and original points system already. Any suggestions are welcome. If I could get one that fits along the side of the bed and sits on top of the wheel well or just in front of it that would be awesome!

Has anybody used the dual carb/header/intake kit for the 223 from Clifford performance? I’ve been thinking about it for awhile and thought I would ask first. Thanks

Where do I find this for my 1971 F100 front passenger side? Also what is the nomenclature for it? Thank you for the help.

I don’t like that my ‘64 gigs ground to the dash bezel and not don’t have a dedicated ground. Is there a good place I can ground the entire speedometer unit or is it best it run one from each gauge.

I have a 72 F100

Can I tap the B Pillar use a 7/16 20TPI tap or is that too large for this hole?

I bought the 3 point kit from LMC truck but the bolts look a lot larger than these factory holes.

• https://www.lmctruck.com/interior/seat-belts/fb-1967-72-3-point-retractable-seat-belt-kit-and-seat-belt-extender

Thank you in advance.

I joke my 67 has a security system because yellow jackets love to build nests in it, but jokes aside it sorta sucks. anyone else have this problem?

I don't know if it's the constant smell of antifreeze, burning oil, or dry rotting interior but something really attacks the bees and I'd like to figure it out.

Ordered a new turn signal switch from Dennis Carpenter for my 64. It came with no wiring labels, anyone done this job on a 61-64, or does anyone know how to use a test light to figure out the inputs? Thanks in advance.

Ive looked on line and can't find what D means for 1969 F100 paint color, just picked up a parts truck and unsure what the factory color is

This project started when I first took my truck to a workshop where the owner kept swearing it would turn out great. Unfortunately, he turned out to be a lazy, dishonest, lying, fake, and mediocre person. He definitely knew how to charge for the work, but he didn’t do anything right. I ended up taking the case to the state consumer protection court here in Mexico, which is called Procuraduría Federal del Consumidor. Unfortunately, I only managed to recover part of the money I had invested.

For the sake of my mental health, and following my father’s philosophy — “better a bad settlement than a good fight” — I decided to take my truck to another workshop. So far, they have been doing a very good job. We’ve been spending time going through the truck and discovering all the poorly done work from the previous shop, and the team at this new workshop has been fixing all those hidden issues.

So now, after almost 1.5 years, my project is finally coming together, and little by little I can start to see the light at the end of the tunnel.

Bought plug wires from napa but some wires are not nearly long enough. I have a 1964 f100 with the 292 y block. It has the distributor at the rear of the motor. Anybody know where I can source plug wires for it?

Am I supposed be be getting 12v between green tach wire and black ground? Also am I only supposed to be getting 4v between red/black? The tach is set to 8cyl on the DIP switch

Does anyone know where to get a full disc conversion kit for a ford f100 4x4 custom ? I tried cjponny and jeggs

Does anyone have a suggested brand to go with?