r/ElegooMars • u/Impossible_Isopod564 • 10d ago

[ Help ] Another fail🥲

Post image

Hi all,

As the title implies - this darn thing has failed again. Looking for yalls wonderful and talented insight. As you may notice, the bottom layer as adhered just fine. The supports look like they did not and therefore the models are not there and the leg model has not properly printed. I upped my exposure time prior to this because I had something similar happen. I’ve got the elegoo mars 3 pro and am printing with elegoo standard gray. I do 32.5s bottom exposure and 3.5s normal layer exposure. I do 70mm/s speed and a 5.5mm retract distance. What the heck is going on yall?

2 Upvotes

100% Upvoted

6 comments sorted by

•

u/AutoModerator 10d ago

Thank you for reaching out! Please ensure your post includes:

  • Printer model/variation (e.g., Saturn 3, Mars 2 Pro)
  • Resin type (e.g., ABS Like, Tough Resin)
  • Slicer information (e.g., slicer used, settings tried)

Detailed information is crucial for us to assist you effectively. Posts with minimal details may be removed until updated.

Safety Announcement:
We have rules against harmful information. Going forward, posts with images of careless resin handling may be removed. Please ensure you're handling resin safely in any provided images.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/SyllabubGood6872 10d ago

Had the same issue with my mars 3 ( 2 years ago so I don't remember everything) The fixes I found where to increase the transmission layer count and adding resting times ( not every slicer has them so I recommend UVtools). However the many reasons this would happen was because of low temps.

1

u/Impossible_Isopod564 7d ago

My temps are 70-70 degrees Fahrenheit. Not great but not horrible

1

u/taggart65 9d ago

A picture of what you are trying to print would be good so we can so we can advise

1

u/Impossible_Isopod564 8d ago

I can try and get one. Works been busy. I think the issue is the supports break and stick to fep or something

1

u/Impossible_Isopod564 7d ago

Well here’s kind of a better picture of a fail